Synopsys Inc . (NASDAQ:SNPS), a global leader in electronic design automation (EDA), reported robust financial results for the third quarter of fiscal year 2024, surpassing its revenue and earnings targets. The company's revenue increased by 13% year-over-year (YoY), and non-GAAP earnings per share (EPS) grew by 27% YoY.
These results reflect the company's successful execution and strategic initiatives, including the planned acquisition of Ansys (NASDAQ:ANSS), which is expected to enhance Synopsys' system design capabilities. With a focus on innovation and customer needs, Synopsys is well-positioned for continued growth, as reflected in its guidance for industry-leading double-digit revenue growth and strong performance across its key business segments.
Key Takeaways
- Synopsys' Q3 revenue rose to $1.53 billion, a 13% increase YoY, with non-GAAP EPS up 27% YoY.
- The company is confident in achieving industry-leading double-digit revenue growth.
- Design Automation segment revenue grew by 6% YoY, while Design IP segment revenue jumped by 32%.
- Synopsys is finalizing the sale of its software integrity business and expects to close the deal in the second half of 2024.
- Full-year 2024 guidance includes revenue of $6.105 billion to $6.135 billion and non-GAAP EPS of $13.07 to $13.12.
- The Ansys acquisition is supported by customers and will address chip package and systems level challenges.
- Growth opportunities identified in EDA, IP, and the automotive segment, particularly in virtualization solutions.
Company Outlook
- Synopsys projects full-year 2024 revenue growth of about 15% and non-GAAP EPS growth of roughly 24%.
- The company's planned acquisition of Ansys is expected to enhance its system design solutions.
Bearish Highlights
- Synopsys remains cautious about the impact of the entity list and macro environment on its operations in China.
Bullish Highlights
- The company's Design Automation and Design IP segments are showing strong performance, with Design IP revenue growing significantly due to demand for interface and foundation IP.
- Synopsys is investing in R&D to stay ahead of customer needs, particularly in hardware and IP interfaces.
- The automotive market presents exciting opportunities for growth, with Synopsys' virtualization solutions being well-received by OEMs.
Misses
- There are no specific data points shared for the early monetization stage of VSO.
- ASO is in the evaluation phase, and its growth expectations are not yet quantified.
Q&A Highlights
- Synopsys does not anticipate immediate impacts from Intel (NASDAQ:INTC)'s comments about using IP and EDA vendors more efficiently.
- The company is developing AI/ML products and sees AI as an essential part of the EDA solution in the future.
- Opportunities for expanding the analog mixed-signal business are identified, particularly in the analog design environment.
Synopsys' third-quarter results demonstrate the company's strong operational execution and commercial momentum. With a clear strategy and focus on innovation, Synopsys is well-equipped to navigate the evolving technology landscape and maintain its leadership position in the EDA industry. The company's investments in AI and system design solutions, along with its strategic acquisition plans, signal a commitment to meeting the complex needs of its customers and driving future growth.
InvestingPro Insights
Synopsys Inc. (SNPS) continues to impress with its financial performance, as evidenced by its latest quarterly results. The company's strategic moves and operational efficiency are reflected in key financial metrics provided by InvestingPro. Here are some insights that may interest investors:
InvestingPro Data shows that Synopsys has a robust gross profit margin of 80.5% for the last twelve months as of Q3 2024, signaling efficient operations and strong pricing power in its market. This is particularly noteworthy as it underscores the company's ability to maintain profitability amidst competitive pressures in the software industry.
Another metric of interest is the company's Price to Earnings (P/E) Ratio, which stands at 56.67. While this indicates that Synopsys is trading at a high earnings multiple, it is also reflective of investor confidence in the company's future growth prospects and its prominent position as a player in the Software industry, as highlighted in the InvestingPro Tips.
Moreover, Synopsys has demonstrated a commendable revenue growth of 23.08% over the last twelve months as of Q3 2024. This aligns with the company's guidance for industry-leading double-digit revenue growth and is indicative of its strong performance across key business segments.
InvestingPro Tips for Synopsys also reveal that the company is trading at a high Price to Book (P/B) multiple of 11.05. While this may suggest a premium valuation, it often reflects the market's perception of the company's asset value and growth potential.
For investors looking for more in-depth analysis and additional tips, InvestingPro offers a comprehensive list of 15 tips for Synopsys, which include insights into profitability, debt levels, and valuation multiples. Visit https://www.investing.com/pro/SNPS for a full suite of professional investment tools and tips to inform your investment decisions.
Full transcript - Synopsys Inc (SNPS) Q3 2024:
Operator: Ladies and gentlemen, welcome to the Synopsys Earnings Conference Call for the Third Quarter Fiscal Year 2024. At this time, all participants are in a listen-only mode. Later, we will conduct a question-and-answer session. [Operator Instructions] As a reminder, today's call is being recorded. At this time, I would like to turn the conference over to Trey Campbell, Senior Vice President, Investor Relations. Please go ahead.
Trey Campbell: Thank you and good afternoon, everyone. With us today are Sassine Ghazi, President and CEO of Synopsys; and Shelagh Glaser, CFO. Before we begin, I'd like to remind everyone that during the course of this conference call, Synopsys will discuss forecasts, targets, and other forward-looking statements regarding the company and its financial results. While these statements represent our best current judgment about future results and performance as of today, our actual results are subject to many risks and uncertainties that could cause actual results to differ materially from what we expect. In addition to any risks that we highlight during this call, important factors that may affect our future results are described in our most recent SEC reports and today's earnings press release. In addition, we will refer to certain non-GAAP financial measures during the discussion. Reconciliation to their most directly comparable GAAP financial measures and supplemental financial information can be found in the earnings press release, financial supplement, and 8-K that were released earlier today. All of these items plus the most recent investor presentation are available on our website at www.synopsys.com. In addition, the prepared remarks will be posted on our website at the conclusion of the call. With that, let's turn the call over to Sassine.
Sassine Ghazi: Good afternoon. We delivered excellent results in the third quarter, exceeding the midpoint of all our guidance targets while setting another quarterly revenue record. We position the company's portfolio with one strategic end in mind, maximizing the value that we deliver to customers in the era of pervasive intelligence. Our focus is on leading innovation in EDA and IP while deepening our differentiation in software-defined systems. Against this strategic backdrop, the Synopsys team continued its strong operational execution in the quarter and commercial momentum remains robust. Revenue was up 13% year-over-year, at the high end of our guided range. Non-GAAP operating margin was 40%, up 3.6 points year-over-year. And non-GAAP EPS was up 27% year-over-year and above our guidance range. We continue to be confident in our guidance for industry-leading double-digit revenue growth. Shelagh will discuss the financials in more detail. First, I'll give some context for our confidence, which is grounded in the continued strong execution of our Synopsys team and industry trends reinforced by our customers and partners. Since becoming Synopsys CEO in January, I've traveled to eight countries, participating in more than 140 meetings with over 80 customers and partners, discussing their challenges and understanding their priorities. The message in every meeting is loud and clear. Synopsys is mission critical to their innovation, which makes our business uniquely resilient. Our success is tied to technology innovation cycles, not end market dynamics. In this era of pervasive intelligence, technology innovation is only accelerating, fueled by the rise of artificial intelligence, silicon proliferation, and software defined systems. The evidence is all around us. Our silicon customers are racing to design the many components necessary to optimize AI infrastructure. Remarkably, design cycles are contracting despite mounting complexity and we help make this possible. This combination of pace and complexity equals good news for Synopsys. Artificial intelligence is driving incredible demand for high performance computing in data centers and new AI powered smartphones and PCs, which are poised for an exciting refresh thanks to silicon innovation. Bottom line, AI needs more and more complex silicon. That is good for Synopsys. Finally, silicon proliferation and AI chip innovation is driving the build-out of manufacturing capacity and accelerating the transition to new advanced nodes. Foundries count on our EDA and IP to enable each new process node. Again, good for Synopsys. These trends reinforce the resiliency of Synopsys business. Additionally, our customer set is expanding as more companies in more industries define and optimize system performance at the silicon level. As a leading silicon to systems design solutions company, Synopsys opportunity has never been greater. And our planned acquisition of Ansys will expand our TAM and further our mission of empowering technology innovators everywhere. The future of technology R&D requires system design solutions with a deeper integration of electronics and physics. That's what we can provide with Ansys, and we're making good progress on closing this important transaction. The regulatory review is proceeding well. We are working cooperatively and constructively with the various regulatory agencies. We have completed all preliminary filings worldwide. Customers continue to express their overwhelming support, and we continue to expect the transaction to close in the first half of 2025. Let's move to segment business highlights, starting with Design Automation. Q3 Design Automation revenue was up 6% year-over-year versus a very strong prior Q3, as Synopsys Design Automation solutions are helping customers accelerate their innovation despite growing complexity. Growing systemic complexity has turbocharged the criticality of verification in chip design. And we offer the most complete portfolio of solutions in the industry. Our next-generation Verdi platform for advanced debug capabilities was adopted by a large US-based GPU company and a large US mobile SoC company, reducing failure debug from days to minutes. While our flagship verification tool, VCS, displays competition at a large US HPC customer, a large Chinese mobile customer, and a large Chinese hyperscaler. Our AI verification product, VSO.ai, is also ramping aggressively, demonstrating up to 10x faster turnaround time, double digit increases in verification coverage, significant reductions in verification compute requirements, and better verification quality. A marquee US GPU company deployed VSO.ai across multiple IPs with turnaround time improvements of 2x to 7x and coverage improvements up to 33%. Our hardware assisted verification business had an excellent quarter as customers upgraded from HAPS-100 to our ZeBu EP product line to leverage one hardware platform for both emulation and prototyping. In Q3, we saw a significant ZeBu hardware expansion at a large US hyperscaler in a direct win versus competition. We also increased ZeBu adoption at a large European IP provider and two large US HPC companies. Increasing demands for high-performance emulation with the opportunity for large capacity expansion were drivers in these wins. We also worked with several large US systems and hyperscaler customers on successful software bring-up workloads with our HAPS product line. Physical verification was also a point of strength in the quarter. We continued to win new designs on ICV with 20 tapeouts in Q3. Four of these tapeouts were on TSMC N3 and one on IFS 18A, where engagements are increasing rapidly. Turning to analog design, our competitive displacements continued in Q3. We now have more than 30 displacements for the year. This quarter, we completed analog full flow wins at the leading European Tier 1 supplier, a North American IP provider, and an Asian SOC vendor. And we displaced competition in analog simulation at two US AI accelerator companies and a global analog chip company. Like in verification, our analog customers are looking to Synopsys as a scale multiplier to modernize their flows and unleash the power of AI to move to more advanced process nodes. Our Synopsys.ai engine for analog, ASO.ai, now has more than 15 customers in evaluation. Transitioning to digital, where we continue to expand our leadership in digital EDA across advanced node design flows, Fusion Compiler delivered the world's first mobile SOC tapeout on Samsung (KS:005930)'s 2-nanometer GAA process this quarter along with a number of customer-first tapeouts at TSMC N2, N3E, and N5. Augmenting fusion compiler with our AI engine, DSO.ai, creates a powerhouse capability for customers. We are now seeing customer adoption spread to the automotive vertical where a leading Asian automotive silicon company demonstrated 30% power reduction in a design with DSO.ai. On to Design IP, which delivered 32% revenue growth as the IP supplier of choice for leading HPC, AI, automotive, and mobile chips at advanced nodes. Driven by AI bandwidth requirements, hyperscalers are pushing consortiums to pull in specification timelines for interface protocols, creating faster innovation cycles and increased opportunity for us and our customers. And we are matching the space with our operational execution. In Q3, we announced the world's first PCIe 7.0 IP solution to enable fast and secure data transfers. We are also seeing increasing momentum in AI edge devices for mobile optimized platforms. We secured two major smartphone customers on leading nodes to enable power efficient mobile devices with GenAI capabilities. While our ARC neural processing unit and DSP processors were adopted into five edge applications, including two new customers. Turning to multi-die, where we have an outstanding lineup of products in the IP and the EDA space for our customers. We continued to broaden our multi-die portfolio, launching 3DIO foundation IP, which is a specialized IO for 3D multi-die integration. In EDA, 3DIC compiler momentum continued with the tape out of multi-die design for an automotive application based on a CoWoS-R interposer and deployment at a major US hyperscaler. We also announced Intel Foundry EMIB, a reference flow for multi-die enabled by 3DIC compiler to accelerate multi-die designs at all stages from silicon to systems. As the on-ramp for the world's foundry, we achieved silicon success on Samsung's SF2 and SF4X processes for a range of interface IP. We also demonstrated the industry's first HBM3 operating at 9.6 gigabits per second in TSMC's advanced 3-nanometer processes and partnered with GlobalFoundries (NASDAQ:GFS) to develop new memory compilers for the 22FDX process technology targeting Edge AI acceleration in automotive and industrial microcontrollers. A couple of closing comments before we transition to Shelagh's remarks. We are working through final closing conditions for the sale of our software integrity business and continue to expect that we'll complete that transaction in the second half of 2024. And before closing, I want to recognize a monumental award to someone I deeply admire and I'm proud to call both a mentor and a friend, Synopsys Founder and Exec Chair, Aart de Geus. Aart was selected to receive the semiconductor industry's highest honor, the 2024 Robert Noyce Award. We look forward to celebrating his leadership and outstanding contributions to our industry at the awards ceremony in November. In summary, we have strong continuing momentum across the business, supported by multiple secular growth drivers. We have a very resilient business model and are mission critical to our customers' innovation. We are aligning our portfolio investment with the greatest return potential to accelerate our growth. Thank you to our employees for their passion and to our partners and customers for trusting us to ignite their future ingenuity. With that, I'll turn it over to Shelagh.
Shelagh Glaser: Thank you, Sassine. We had an excellent Q3 with record revenue and non-GAAP EPS was above our guidance range. We continue to execute well, which is a testament to our strong momentum across the business, leading technology that is mission-critical to our customers, and a resilient and stable business model. I'll now review our third quarter results which are presented on a continuing basis operation. All comparisons are year-over-year unless otherwise stated. We generated total revenue of $1.53 billion, up 13%, and at the high end of our guided range. Total GAAP costs and expenses were $1.17 billion. Total non-GAAP costs and expenses were $915 million, resulting in non-GAAP operating margin of 40%. GAAP earnings per share were $2.73. Non-GAAP earnings per share were $3.43 and above our guided range. Now onto our segment. Design Automation segment revenue was $1.06 billion, up 6% compared to a very strong Q3 a year ago. Design Automation adjusted operating margin was 41.5%. Design IP segment revenue was $463 million, up 32%, driven by strength in interface and foundation IP. Design IP adjusted operating margin was 36.7%. Operating cash flow, including discontinued operations, was $455 million for the quarter, and free cash flow, including discontinued operations, was $415 million. We ended the quarter with cash and short-term investments of approximately $2 billion. Now to guidance. Except for cash flow metrics, all targets are presented on a continuing operations basis. The full year targets for 2024 are revenue of $6.105 billion to $6.135 billion, total GAAP cost and expenses between $4.58 billion and $4.60 billion, total non-GAAP cost and expenses between $3.76 billion and $3.77 billion, resulting in more than 2 points of non-GAAP operating margin improvement at the midpoint. Non-GAAP tax rate of 15%, GAAP earnings of $9.71 to $9.85 per share, non-GAAP earnings of $13.07 to $13.12 per share, cash flow from operations of approximately $1.3 billion, free cash flow of approximately $1.1 billion. Now to targets for the fourth quarter. Revenue between $1.614 billion and $1.644 billion, total GAAP costs and expenses between $1.21 billion and $1.23 billion, total non-GAAP cost and expenses between $1.03 billion and $1.04 billion, GAAP earnings of $2.25 to $2.39 per share, and non-GAAP earnings of $3.27 to $3.32 per share. Our press release and financial supplement include additional targets and GAAP to non-GAAP reconciliation. Consistent with prior years, we will provide additional comments and guidance for 2025 when we report next quarter. In conclusion, for 2024, we expect to achieve revenue growth of approximately 15%, non-GAAP operating margin improvement of more than 2 points, and approximately 24% non-GAAP EPS growth. We continue to see strong momentum in the business, reflecting our relentless execution and leadership position across our segment, mission-critical products to enable our customers' innovation, and a stable and resilient business model. With that, I'll turn it over to the operator for questions.
Operator: [Operator Instructions] Your first question comes from the line of Harlan Sur with JPMorgan. Your line is open.
Harlan Sur: Good afternoon. Thank you for taking my question and great execution in the quarter. Sassine, as you mentioned, leading edge chip design activity continues to accelerate at the 3-nanometer, 2-nanometer nodes, especially around AI and accelerated compute by both merchant, but also a significant amount of custom ASIC chips that are ramping that are coming to the market. But despite all of this, I mean, we are coming off of a pretty severe semiconductor downturn. And, one of your large leading edge customers has recently announced a significant amount of layoffs across the organization. They did also talk about driving better efficiencies around IP and EDA solutions. I interpreted this as they're going to do less of their own internal IP development, less of their own internal EDA software tool development, and potentially buy more merchant IP and more core EDA tools from Synopsys and maybe some of your other competitors. But I wanted to get your interpretation of this announcement and the near to midterm impact if any on your bookings, revenues, or market share momentum at this customer.
Sassine Ghazi: Thank you, Harlan, for the question. I want to first comment on the first part of the statement you made, which is you're right. It's such an exciting time to be in our industry where our silicon customers are racing forward to deliver to the opportunities in the AI build-out, be it in the data center or on edge or on device, with the flavor of custom silicon, as well as system companies increasing their investment to differentiate along that stack from workload down to silicon. As far as our customer, Intel, that you're referring to, it's nothing new to Intel, by the way, that they started looking at external EDA and IP. That journey started in 2007. As you recall, most of their EDA were internally developed and IP. And it's been a journey over the last number of years to transition externally. Now, with this company transformation they're going through, this is an opportunity to look deeper at what's core, what's context, and looking seriously at efficiency and where to target their resources, where they can differentiate or they can pick up from the ecosystem. So we do believe that there will be an opportunity for further ecosystem leverage for both EDA and IP. As far as short to midterm impact, we don't see much impact actually. As you know, our agreements are committed for long term and we continue on delivering high value and impact to that customer. So we don't see much in terms of a negative impact in the short or midterm.
Harlan Sur: Great, thank you for that. And just over the past 90 days, we've heard of many challenges your semiconductor customers are facing as they sort of push the boundaries on leading edge chip designs, right? And these challenges don't revolve around the actual performance of the chip itself. The issue is that once you drop these chips into advanced packaging solutions, for example, the power dissipation of these chips is generating a significant amount of heat, causing thermal, mechanical, stress interactions with the packaging, causing a whole bunch of yield and reliability problems. And then on the flip side, we see more and more of your customers moving into the systems market, like AMD (NASDAQ:AMD) and their recent announcement to acquire ZT Systems, right, where AMD all of a sudden is going to be doing full-blown board, server, rack-scale server design. It still seems like this is exactly where having Ansys systems analysis solutions as a part of the portfolio becomes a big advantage for the team. But given all of these dynamics, I mean, is the support from customers around the Ansys acquisition continuing to build positive momentum? And then maybe in the interim, what is Synopsys doing to help customers with some of these chip package and systems level challenges?
Sassine Ghazi: I will start with a yes. Yes on the continued support from customers and actually not only silicon customers, silicon and system customers in support of the transaction for the exact same reason you highlighted. If you look at an advanced silicon in an advanced package which has many dyes and those are very advanced chiplets as you know, each chiplet by itself is a very complex die to design. You put them all together, the challenge is no longer electronics. It's electronics plus all the other attributes you mentioned from structural, fluid dynamics to thermal. How do you design them during the architecture phase that you know once you go into packaging -- manufacturing and packaging, it's going to work in the field. Now you look at that as the chip system. That chip system to your AMD reference is going to sit on a board, is going to sit in some sort of a rack and cluster of racks. How are you designing based on that workload and that complexity at the system level to determine how to manage and design for the heat, to manage and design for what type of cooling you want to put, what type of power supplies do you need, et cetera, et cetera. And we've been positioning our company, as you know, as a silicon-to-system design solution company. And I love the reference right now as I hear our customers talking about silicon to software to systems, which is exactly the solution and the partnership we're working with our customers on.
Harlan Sur: Thank you.
Sassine Ghazi: Thank you, Harlan.
Operator: Your next question comes from the line of Vivek Arya with Bank of America. Your line is open.
Vivek Arya: Thanks for taking my question. Sassine, at the Analyst Day, you had suggested that core EDA, over time, the growth could go from 12% to 14% from AI monetization. I'm curious, where is Synopsys in that journey? What have been the early signs to drive this kind of acceleration in the business?
Sassine Ghazi: Yes. So, Vivek, if you look back not too long ago, a best case outcome for traditional EDA was in the upper single-digit. The reason we've been able to grow in the double digits and what we talked about 12% to 14% is due to complexity of these systems, introduction of new technology to deal with that complexity, and we referenced AI. AI from a journey point of view, we introduced first DSO.ai, which is the optimization engine on the digital portion of the design. As I mentioned in my prepared remarks, we have VSO.ai, which is in adoption and used by a number of customers at this stage and ramping, ASO.ai for analog. And the part I did not mention in this script itself, we talked about Generative AI. We're using LLM for knowledge assistance and generation of a portion of the chip itself. So where are we in the monetization and maturity? With DSO.ai, we've been selling it for about four years now. We're capturing on average about 20% uplift from the baseline of that portion of the contract. For VSO, and it's still in early stage, we're in an early monetization stage, but we don't have enough data point to share with you yet, where is it. Will it be at the similar 20% higher, lower? We're not there yet. ASO, we're in an eval phase, what it means is in customer validation. And so it's similar to the Generative AI. We have a number of customers across five products we have currently that offer knowledge assistance at that stage. So the 12% to the 14%, that's why we did not specify a timeframe, but what is absolutely clear is that value we're delivering will be able to, and the impact will be able to justify a monetization to support that 2% growth we communicated.
Vivek Arya: Thanks, Sassine. And for my follow-up, kind of more near term, so EDA growth so far this fiscal year has been up about 9% or so. I understand last year was a tough year for the semiconductor industry, so you're probably feeling the effects of that. But, what do you see going into next year conceptually? Do you think the seeds are being laid to help drive kind of a return back to your trend line growth in EDA or is it too early to make that kind of conclusion?
Sassine Ghazi: So for Design Automation, it's double-digit growth and please measure it based on a trailing 12 months, not quarter-over-quarter, because sometimes you have, like in this particular quarter we had an outstanding Q3 ‘23. That does not mean that there is anything alarming, but the comparison quarter over quarter may be misleading. As you look at the trailing 12 months, we still feel strongly, it's a double-digit growth. And within Design Automation, the mix is changing. You have the traditional, ratable software. You have the hardware, which is more upfront. And then you have increasing portion becoming an FSA for the software, where customer wants that flexibility. For example, that's how they get access to cloud is through that flexible spending account. That's why quarter-over-quarter comparison, I'll caution you around it, look more at the trailing 12 months.
Shelagh Glaser: Yeah, and I would just add that our TTM is 10%, and just as you see in references, Q3 of last year was 23%, so 6% on top of 23% is obviously tremendous growth, and Q3 of last year did include some expiring contracts, so obviously that's not reoccurring.
Sassine Ghazi: Thanks, Vivek.
Shelagh Glaser: Thanks, Vivek.
Operator: Your next question comes from the line of Joe Vruwink with Baird. Your line is open.
Joe Vruwink: Great. Thanks, everyone. IP with a very strong revenue growth in the quarter, but upfront product, even stronger growth in the quarter. I'm wondering if the latest generation of hardware assisted verification is showing up and that's the incremental contributor here and relatedly I wanted to ask how order flow for the new hardware products compares maybe if you compare it to the launch of EP1 a couple years ago.
Sassine Ghazi: Yes, so on the hardware itself, we actually are selling our existing product. We introduced the EP system, which you need to think of it as between prototyping and emulation, which is a suite use case. But we have a very competitive system in a number of use cases. The use case that is the suite for Synopsys is software bring-up. Because of the performance our system is able to deliver, we're seeing actually a very nice adoption and pull in, not pull in, like requirements from the customer to adopt those systems for software bring-up. The other use case that we identified a while back as an area we need to make sure we have a competitive solution is simulation acceleration. That's the use case that typically or historically Synopsys did not compete as strongly in that use case. We had couple wins in the quarter where customers are looking for a same hardware, same compile that they can use it as a continuum from their prototyping to their emulation. That's why Joe you see the -- a strong hardware momentum and we don't see it slowing down given the complexity.
Shelagh Glaser: And the other upfront component I would add is IP, and we had an exceptionally strong IP quarter. And to the extent that that IP is already available and a customer is ready to consume it, then that can happen pretty quickly.
Joe Vruwink: Okay, that's all very helpful. And then the comment was made that commercial momentum remains robust. I'm wondering if that's just evident in backlog developments, if you can give an update there and then any, I know you don't like to give forward guidance on backlog, but how the pipeline looks into year-end and maybe the initial part of next fiscal year? Thank you.
Shelagh Glaser: Sure. Thanks, Joe. So backlog for the quarter was $7.9 billion. And to give you a reference on continuing operations last Q3, so Q3 of 23, ex-SIG, that was $6.5 billion. So it's up very nicely year-on-year as we're continuing to race ahead to support the customers and all the complexity that they're dealing with. And that number does ebb and flow as we build and burn. It was relatively flat though quarter-on-quarter. Thanks, Joe.
Joe Vruwink: Thank you.
Operator: Your next question comes from the line of Jason Celino with KeyBanc. Your line is open.
Jason Celino: Hey, thanks for taking my questions. Maybe my first one, just on the guidance for the year, it looks like you're narrowing the revenue range. As much as I'd like you to raise every quarter, I think we've already seen you raise two to three times this year, so I think we'll give you the pass. But curious if there were any areas that could have outperformed more or any areas down-ticked that offset some of the strength you did see. Curious there. Thanks.
Shelagh Glaser: Well, Jason, as you said, we've raised several times this year. So the confidence of the Q3 results really allowed us to narrow our guidance to give 15% as the midpoint and I would say we're seeing that strength that Sassine is talking about in the industry, we're seeing that across our product line. So good engagement with customers, really, across the board as they accelerate their roadmaps to meet the robust AI demand. We did raise non-GAAP operating margin and non-GAAP EPS because again, as Sassine talked about, we're being very, very deliberate in our investment and our expenses and making sure that we're onboarding some of the things we're talking about doing with customers with AI inefficiency. And so you saw us improve on both those metrics. Thanks, Jason.
Jason Celino: Excellent. And then one quick one on China. It looks like it was down 8% in the quarter but still up 8% for the year. Maybe just compared to the last quarter, I guess, how are you feeling about the demand environment in that region?
Sassine Ghazi: Yeah, that's why Jason, at the beginning of the year, we talked about taking a pragmatic approach on China for two factors. One is the continued impact of the entity list, technology restrictions, and then the second is the macro environment in China. Now, all of that being said, we're still executing well in China. We're growing in China, and it's excellent to see when you look at the rest of the regions, we are performing incredibly well. So we continue to take a balanced approach on China given those two factors.
Jason Celino: Perfect. Thanks, Sassine.
Sassine Ghazi: You're welcome.
Operator: Your next question comes from the line of Lee Simpson with Morgan Stanley. Your line is open.
Lee Simpson: Great. Thanks for fitting me in, and great quarter, guys. Just wanted to ask an R&D question, if I could. So if you look at the numbers, it looks as though R&D was maybe slightly ahead of some people's expectations out there. And I think to be fair, there's been quite a build around new product updates, particularly hardware, but obviously around IP interfaces, maybe foundational IP as well. So I wondered if there was scope as we go through the end of this year and into next for you to maybe flatten some of that R&D and just to help with that outperformance on the earnings line or maybe the pace of product innovation is unlikely to let you do that. I just wanted to understand the balance between those two positions.
Shelagh Glaser: Yeah, so certainly the pace of the industry and as Sassine talked about, even the pace of new standards in IP is accelerating. So we have to -- we almost have to be a step ahead of our customers. So continuing to invest in that is incredibly important. And then continuing to invest and building out both our hardware roadmap that you talked about and then continuing to evolve our EDA capabilities is really top of our priority when we think about our investment. So, I don't see R&D investment as an area of savings for us really anytime soon. Obviously, a lot of the benefits and efficiencies that we're driving there, we think about reinvesting those in building further product innovation.
Lee Simpson: Great, very clear. Maybe just as a follow-up, I wanted to ask an end-market question, maybe on automotive. I think in the past you've noted the growing focus on automotive, and Sassine, some of your comments seem to call that out. We are seeing a pivot to software-defined vehicles. We are seeing custom silicon coming into view. So just trying to understand what proportion of growth would you say is sensible for us to assume over the next couple of years coming out of automotive, given all the work, including some big microprocessors going into the car? Thanks.
Sassine Ghazi: Thank you, Lee, for the question. Automotive has been a very exciting segment, I want to say, over the last three to four years and a couple things were driving it, is the whole push towards delivering a smarter car, meaning more sophisticated silicon and the same exact challenge at the system level that we talk about often in the hyperscaler context applies to automotive. A number of the automotive OEMs started, some are already doing it, other are starting to consider building their own silicon. But what is absolutely happening, even if they're not building their own silicon, they're investing in the electronics system, meaning as they're architecting the system of the car, the electronic system of the car, and they're working with their Tier 1, Tier 2 suppliers, how do they communicate the spec of these chips that fits within the software and the overall system requirements. For Synopsys, that's an opportunity where we sell what we call our virtualization solution, where we work with both the semiconductor companies to virtualize their chip, then we work with the automotive OEMs to define that architecture for the electronics based on these virtualization and virtual models. You can think of it as digital twin for electronics. And that's contributing for an acceleration in the sales of some of our solutions and products that were not generated necessarily for the automotive market, but right now that's a new market that are adopting these solutions. We do anticipate that that market will continue on growing given those systems, those cars are going to be more intelligent, more connected, which is a great opportunity. I cannot go further than that, Lee, in terms of what percentage of the overall growth, et cetera, et cetera, because that's not how we report per se by market segments.
Lee Simpson: Understood. Thanks for the color, sir.
Sassine Ghazi: You're welcome.
Operator: Your next question comes from the line of Ruben Roy of Stifel. Your line is open.
Ruben Roy: Thank you. Sassine, hi. I wanted to go back to something you mentioned in your prepared remarks regarding design cycles contracting. And you mentioned that that's in the face of increasing chip complexity. And I think some of that, at least to me, seems like it's a relatively new development. And wondering how we should think about that as a maybe longer term impact to your business. I'm thinking about this, obviously there's AI and your tools helping with those design cycle accelerations, but are there other sort of areas that your customers are asking you for as they try to accelerate their designs? And really, I guess the longer term question here is, it's happening at the leading edge. It's happening with the most complex designs. But do you think that that is a trend that could sort of move across the systems and IC industry as you continue to develop on your end?
Sassine Ghazi: Yeah, excellent question, Ruben. If you look back at the last, I don’t know, two, three decades, the entire industry had a rhythm of the next product and it was Moore's Law. And not every company just moved with the latest Moore's Law offering. You move to it when you need from a performance power, cost, et cetera, to move to it. Right now, when you look at number of customers that they're talking about a reduced design cycle from what it used to be three years, 18 months, down to possibly one year, it’s -- we cannot look at it as the traditional way of designing a chip. Those will be definitely multi-die systems with optionality in that advanced package to target a new product in their roadmap to serve a certain customer set. How fast do I see the rest of the market moving in that direction? Not too many customers can afford and have the skill and the market for them to move in that direction because it's very complex. So, it's both the cycle time of the design is shrinking with a significantly increasing complexity. For us as an industry, that's great news because from EDA for design automation at the chiplet level and the advanced package level, you need to use the latest technology with the AI capabilities, et cetera. For IP, it's requiring, as I mentioned as well in my prepared remarks, for these protocols to shrink from designing them over two, three-year set of requirements to a much shorter cycle and even customer adopting it before the spec is even finalized. Then on the hardware verification side, you need, of course, the ability to verify, validate all of this. Now, as you look at this whole dynamic, while it's very exciting, we need to wait and see how many customers will have the ability from resources, skills, investment to pace with that acceleration.
Operator: Your next question comes from the line of Charles Shi with Needham & Company. Your line is open.
Charles Shi: Hi, good afternoon. I have a question about China. I think at the beginning of the year, I think for two reasons, right? Restrictions and the macro, you were sort of expecting maybe China doesn't grow as fast as the corporate which kind of implies maybe the percentage of China revenue probably going to be lower. But you also said the dollar wise is probably going to be still going to be [hire young] (ph) year for the full year. But the first three quarters of the fiscal year looks like you may be ahead of that plan, meaning that the contribution wise, it may actually get ahead of last year's 16% contribution from China, and that we should also imply actually China may grow faster than the corporate. There's a chance you actually can grow that faster than the corporate. Wonder what has changed. And I -- specifically the Q3 number from China is particularly strong and related to that, did you see any of the pull forward revenue from your Chinese customers for whatever reason maybe for this year of them getting banned by any of the new export controls? Mind if you provide some color there?
Sassine Ghazi: So I'll start with the last part of the question. No, we're not seeing anything unusual in terms of pull-ins or a different approach to engaging Synopsys. As far as what we communicated at the beginning of the year, it still holds true. The reason you may see quarter-over-quarter growth in a specific region is, again, based on the mix of the products that we have. It may be a very strong hardware or IP quarter or more FSA pull down. That's why you see it. But nothing changed from what we communicated at the onset of the year.
Operator: Your next question comes from the line of…
Trey Campbell: Operator, I think you may have had a follow up, Charles.
Operator: Sorry?
Charles Shi: Yes, I do have a follow up, yes. The other question, maybe for Shelagh, I think the non-GAAP expense looks like you are doing better, you're actually also ahead based on the numbers I can see that the July quarter you did the $10 million better compared with what you planned as the total non-GAAP expense and for the full year $25 million less than what you expected. But wonder what's the change compared with three months ago? Is there anything like the timing of the hiring, et cetera? Because I did remember some of the OpEx growth into the year and it was for you to invest in some new opportunities like in IP, like [UCIe] (ph), EDA, et cetera. So what's driving the slightly lower OpEx expectation here? Thanks.
Shelagh Glaser: Yeah, so we're continuing to invest. We talked about continuing to invest and building out roadmap that we talked about in Investor Day, continuing to invest, building out IP titles. And it's really all about making sure that we're being intentional about where our overall investment is. And so while we're investing in things, we're also driving efficiencies in the business as we implement AI for ourselves and we implement digital transformation. So I would just say we're being really prudent about our expense structure, but we are investing in the new product innovations. And then we also had some good news on interest and other. So both of those things being really disciplined on our investments and then some good news on interest and other is what's contributing to that upside.
Shelagh Glaser: Thank you for the question, Charles.
Operator: Your next question comes from the line of Joshua Tilton with Wolfe Research. Your line is open.
Joshua Tilton: Hey guys, thanks for sneaking me in here. I actually kind of want to follow up on few questions already -- asked already. The first one is a question about Intel's comments, but I kind of just want to ask you very straightforward and very clear. And the question is, are there any changes in your forward growth expectations because of Intel's comments about laying people off, using IP more efficiently, using EDA vendors more efficiently? And if not, what gives you the confidence that there is no change going forward?
Sassine Ghazi: Yes. So when we engage customers, we're engaging on programs that are multi-quarters type of investments we need to make before we see the needle moving in terms of impact on our business. That's why when you think of our business as we refer to it as resilient, because it's a multi-year type of commitment, and even if Intel were to move more IP, let's say, to Synopsys, these are things you will not see the impact in terms of revenue until it takes us the cycle to build that IP, deliver it back, et cetera, et cetera. So that's why short term to midterm, we don't see an impact in the positive or the negative just simply because of the way we structured our engagement. And that's unique to Intel. This is just broadly. That's how we engage in IP build out and of course EDA is more straightforward.
Operator: Your next question comes from the line of Jay Vleeschhouwer with Griffin Securities. Your line is open.
Jay Vleeschhouwer: Thank you. Sassine, with respect to your own product development of AI/ML branded products, one question I have is, how does the development process, or let's call it the intensity of development for AI products differ, if at all, from your conventional product developments? In other words, how do you measure your own AI development productivity or your readiness [for GA] (ph) of those products versus conventional EDA products? Relatedly, at DAC two months ago, there was an interesting panel discussion in which Shankar participated regarding the evolution of EDA, AI/ML products and whether they remain separately branded products indefinitely or whether inevitably they become subsumed as features within the core product. So Maybe you can address some of that. And then my follow-up will be about custom.
Sassine Ghazi: Thank you, Jay, for the question. Actually, it's a very good question. If you look back at the rhythm of product releases, let's call it, the traditional EDA software were driven by foundry-specific PDK, tuning, tweaking, we needed to do in order to make sure that the customer who is on the leading edge with that process node have the right tool that is enabling all the features that foundry has, et cetera. So it's from a process technology. From a customer architecture point of view, we did not have to do much different from a customer to a different customer, so they can use the same product, et cetera. With AI, let's call it, that sits inside the tool or around the tool, the optimization engine using AI that can accelerate the traditional engine of EDA to some extent, was very similar, where we just released it based on the release cycle of the products. So with DSO.ai same release as Fusion Compiler, VSO same as VCS, Verdi, et cetera. With Generative AI, the -- not only the pace of which model to use, which customer environment to accept these models, because they may have their own preference in which they want to use GenAI in the context of their own environment in which they are designing the chip. So it's becoming at a different pace of releasing this technology as well as, I want to say, customer-specific for some of these engagements and releases from how to deal with it, so we're not having a special product for each customer, is from an engineering development point of view, what are the layers that we can have as common and what's the layer that we can customize at a fast pace without slowing away the investment that we have at the infrastructure level. So that's what's changing in terms of there's the optimization AI, there's the GenAI and the traditional EDA. As to the point that Shankar made, I agree that in our current engagement with customers, especially on the advanced most complex chips, customers is not differentiating, does -- will I use AI with Fusion Compiler or not. They will just use it as part of the expectation is I need to use everything you give me in order to achieve my target. So, as we start moving forward, will we keep thinking of AI in and around EDA as a separate or as part of the solution, where -- how we see it is absolutely will become an expected part of the solution.
Jay Vleeschhouwer: Okay. For my follow-up on custom, which you've now referred to the last several conference calls, what is your ambition for how large a business that can be? When we look at the industry data, things having to do with analog mixed signal, layout and analysis are roughly a mid-teens percent of EDA, excluding IPs. In other words, mid-teens percent of Design Automation. A lot of that obviously is skewed towards cadence and Ansys. But would it be your inhibition that your analog mix signal business could ultimately be about a mid-teens percent of your Design Automation business, if not more?
Sassine Ghazi: So Jay, we see this as an opportunity on two fronts. When you think of analog, there are two portions of analog design that we offer solution for. One, is the verification simulation of analog. And there, as you know, we have a fairly strong portfolio. And so does our competitor. Actually, they offer a very strong portfolio. Where we are a much smaller portion of the TAM is in the analog design environment. And in the analog design environment, these are the wins per se that we've been referring to in this earnings call, the previous earnings call, and they are driven by a discontinuity and that discontinuity is those customers are dealing with the same challenge that we talked about for the traditional logic, digital type of customers. which is an increased complexity, faster cycle time for the design. So they are leveraging any new bells and whistles that the industry can offer. In this case, ASO.ai and a more modernized approach to do an analog chip. So of course, we have an aspiration to grow into that TAM. And we're excited about the offering and our customers' interest.
Trey Campbell: Thanks, Jay. Operator let's go ahead and wrap up the call. Thank you, everyone.
Operator: Thank you. This concludes today's conference call. We thank you all for joining. You may now disconnect.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.