Steel Dynamics , Inc. (NASDAQ: NASDAQ:STLD) announced a robust start to 2024 with near-record steel shipments totaling 3.3 million tons and a significant increase in higher-margin products due to the launch of four new value-added flat rolled steel coating lines. The company's first-quarter financials showed a net income of $584 million and adjusted EBITDA of $879 million.
With liquidity standing at $3.1 billion, Steel Dynamics also declared an 8% increase in cash dividends and repurchased $298 million of its common stock. The earnings call highlighted the strong performance of the steel fabrication segment and increased demand in metals recycling, driven by North American steel producers. The company's optimistic outlook is supported by positive industry fundamentals, with expectations of steady steel demand and pricing for 2024.
Key Takeaways
- Near-record steel shipments of 3.3 million tons for Q1.
- Launch of four new value-added steel coating lines.
- Net income of $584 million and adjusted EBITDA of $879 million.
- Strong liquidity at $3.1 billion, with capital investments planned at around $2 billion for the year.
- Dividends increased by 8%, with $298 million in stock repurchases.
- Optimistic industry outlook with expectations of sustained demand and pricing.
Company Outlook
- Steel Dynamics projects positive industry fundamentals for 2024 and beyond.
- Continued focus on transformational growth initiatives.
- Strong cash generation capability and solid financial metrics.
- Steel pricing improved, with flat rolled prices recovering in March and April.
- Steel backlogs showing improvement from December to March.
- Optimism about steel demand and pricing for 2024.
Bearish Highlights
- Slight quarter-over-quarter price erosion observed in the steel fabrication segment.
Bullish Highlights
- Increased demand for coated products, particularly in the solar energy sector.
- Diversification of coated product offerings to meet customer demands.
- Strong operating income from the steel fabrication segment.
- Increased demand from metals recycling operations.
Misses
- No specific financial misses were discussed in the summary provided.
Q&A Highlights
- The company made significant improvements in operating efficiency at the Sinton facility.
- Two new value-added coating lines were successfully commissioned.
- Positive outlook on federal programs impacting joist and deck products.
- Robust spreads in the coated and hot roll markets attributed to increased market share and demand.
- No direct impact from US-Mexico trade tensions; resolution expected.
- Anticipation of lower imports and monitoring of coated product imports.
- Carbon-based tariffs not expected to bring meaningful change in American policy.
- Steel intensity for data centers is comparable to warehousing.
Steel Dynamics, Inc. showcased a strong first quarter in 2024, with their earnings call underscoring the company's successful operational performance and strategic growth initiatives. The company's Sinton team achieved positive EBITDA, and significant progress was made on aluminum flat roll investments.
With the steel fabrication segment and metals recycling operations performing well, the company maintains a confident outlook for the rest of the year. Investments in value-added products and operational efficiency have positioned Steel Dynamics favorably in the market, as reflected by their optimistic projections for steel demand and pricing.
The company's leadership, particularly Mark Millett, emphasized the importance of their competitive position, low carbon footprint, and the potential for further growth opportunities.
InvestingPro Insights
Steel Dynamics, Inc. (NASDAQ: STLD) has demonstrated financial resilience and strategic acumen in the first quarter of 2024, with a robust performance that aligns with the positive metrics reflected in InvestingPro data. Here are some notable insights:
- The company boasts a healthy market capitalization of $20.52 billion, supporting its position as a significant player in the steel industry.
- A favorable price-to-earnings (P/E) ratio of 8.79, which slightly adjusted to 8.51 for the last twelve months as of Q1 2024, suggests that the stock could be undervalued compared to earnings.
- Strong returns are evident, with a 3-month price total return of 15.49% and an impressive 6-month price total return of 32.91%, highlighting the company's robust performance in the shorter term.
InvestingPro Tips for STLD further underscore the company's strengths:
1. Steel Dynamics has shown a commitment to enhancing shareholder value, as evidenced by management's aggressive share buyback strategy. This not only reflects confidence in the company's future but also serves to increase earnings per share over time.
2. The company's high shareholder yield is a testament to its ability to return value to its investors through both dividends and share repurchases.
For readers interested in a deeper analysis, there are 15 additional InvestingPro Tips available for Steel Dynamics, which can be found at https://www.investing.com/pro/STLD. These tips provide more granular insights into the company's financial health and market performance.
To gain full access to these insights, readers can use the coupon code PRONEWS24 to get an additional 10% off a yearly or biyearly Pro and Pro+ subscription at InvestingPro. This exclusive offer allows investors to leverage real-time data and expert analysis to make informed decisions in the dynamic market landscape.
Full transcript - Steel Dynamics Inc (STLD) Q1 2024:
Operator: Good day, and welcome to Steel Dynamics First Quarter 2024 Earnings Conference Call. At this time, all participants are in a listen-only mode. After management's remarks, we will conduct a question-and-answer session and instructions will follow at that time. Please be advised this call is being recorded today, April 24, 2024, and your participation implies consent to our recording this call. If you do not agree to these terms, please disconnect. At this time, I would like to turn the conference over to David Lipschitz, Director, Investor Relations. Please go ahead.
David Lipschitz: Thank you, Matthew. Good morning, and welcome to Steel Dynamics first quarter 2024 earnings conference call. As a reminder, today’s call is being recorded and will be available on our website for replay later today. Leading today's call are Mark Millett, Chairman and Chief Executive Officer of Steel Dynamics; Theresa Wagler, Executive Vice President and Chief Financial Officer; and Barry Schneider, President and Chief Operating Officer. The other members of our senior leadership team are joining us on the call individually. Some of today's statements, which speak only as of this date maybe forward-looking and predictive, specifically preceded by believe, expect, anticipate or words of similar meaning. They are intended to be protected by the Private Securities Litigation Reform Act of 1995, should actual results turn out differently. Such statements involve risks and uncertainties related to integrating or starting out new assets, the aluminum industry, the use of estimates and assumptions in connection with anticipated project returns and our steel metal recycling and fabrication businesses as well as to general business and economic conditions. Example of these are described in the related press release as well as in our annually filed SEC Form 10-K under the heading Forward-Looking Statements and Risk Factors found on the Internet at www.sec.gov, and if applicable, in any later SEC Form 10-Q. You also find any referenced non-GAAP financial measures reconciled to the most directly comparable GAAP measures in the press release issued yesterday entitled Steel Dynamics Reports First Quarter 2024 Results. Now, I'm pleased to turn the call over to Mark.
Mark Millett: Thanks, David, and good morning, everybody. It's good to be with you for our first quarter 2024 earnings call today. Once again, our teams achieved a strong first quarter financial and operational performance. Quarterly steel shipments were a near record 3.3 million tons. The team successfully began operating our four new value-added flat rolled steel coating lines, which adds about 1.1 million tons of higher margin product diversification to our portfolio. The Sinton team continues to make significant headway, hitting record milestones and achieving positive EBITDA for the quarter with significant improvements on the way. And we're also making fast progress on our aluminum flat roll investments. There continues to be strong commercial support for a new and innovative supply chain solution provided by Steel Dynamics, as we're a well-known and highly regarded metals producer. And financially, the team continues to excel. They consistently achieve superior financial metrics and best-in-class return on invested capital. The product of the passionate can do performance driven culture and our high margin value-added growth strategy. A stark and persuasive indicator of the effectiveness of our business model is our relative EBITDA per employee generation, which is substantially higher than any of our competition. I'm incredibly proud of the Steel Dynamics team. They are the foundation of our company and they drive our success and I'm proud to stand among them. They are special and we're focused on providing the very best for their health, safety and welfare. We are actively engaged in safety at all times and at every level of our company, keeping safety top of mind and an active conversation each and every day. Despite excellent safety performance compared to industry peers, there's more to do. We will not rest until we consistently achieve our goal of zero injuries. But with that, Theresa, would you like to give us some color on the quarter?
Theresa Wagler: Thanks, Mark. Good morning, everyone. Thanks for joining us. I add my sincere thanks to our teams for another strong performance. Our first quarter 2024 net income was $584 million or $3.67 per diluted share with adjusted EBITDA of $879 million. First quarter 2024 revenue of $4.7 billion was 11% higher than sequential fourth quarter results supported by strong volume and higher realized selling values across the steel platform. Our first quarter operating income of $751 million was 45% higher than fourth quarter results driven by steel metal spread expansion, especially within our flat rolled operations. A quick note as we construct the aluminum facilities, non-capitalizable expenses are required to flow through SG&A until startup, so you will see increased costs in that line item as we start operations mid-2025 and the first quarter that additional amount was about $14 million. As we discussed our business this morning, we see positive industry fundamentals for 2024 and beyond and we're focused toward our continued transformational growth initiatives. Our Sinton, Texas flat rolled steel division operated close to 70% of capacity for the quarter, and as Mark said, generated positive earnings. Our steel operations generated strong operating income of $675 million in the first quarter supported by near record shipments and increased realized product pricing. For those of you who track flat rolled products by type, in the first quarter, hot rolled shipments were 1,062,000 tons, cold rolled shipments were 130,000 tons and coated shipments were 1,220,000 tons. Operating income from our metals recycling operations was $23 million, significantly higher than sequential fourth quarter results as increased domestic steel demand supported higher volume. As many of you already know, we're the largest North American metals recycler processing and consuming ferrous scrap and non-ferrous aluminum, copper and other metals. The team continues to effectively lever the strength of our circular manufacturing model, benefiting both our steel and metals recycling operations as well as shortly our aluminum flat rolled operations. Our steel fabrication segment achieved strong operating income of $178 million in the first quarter, lower than sequential fourth quarter results due to weather impacted in seasonal and lower shipments and metal spread compression as realized pricing declined and steel raw material input costs increased. Our joists and deck backlog extends through the third quarter 2024 with strong forward pricing, and pricing has stabilized at historically strong levels during the quarter. Infrastructure Inflation Reduction Act, and DOE decarbonization support and manufacturing onshoring are expected to increase domestic fixed asset investments later this year and into next year, which will support our steel operations and our fabrication business. Our cash generation continues to be strong based on our differentiated circular business model and highly variable cost structure. During the first quarter of 2024, we generated cash flow from operations of $355 million, which was reduced by an annual company-wide profit sharing contribution of $265 million. We ended the quarter with strong liquidity of $3.1 billion. For 2024, we believe full year capital investments will be in the range of $2 billion, of which approximately $1.4 billion relates to our aluminum flat rolled investments and $175 million toward our biocarbon facility. In February, we increased our cash dividend 8% to $0.46 per common share, continuing our increasing dividend profile as through cycle cash flow grows. We also repurchased $298 million of our common stock, representing 1.5% of our outstanding shares. At March 31, $1.1 billion remained available for our share repurchases under our new $1.5 billion plan. Our capital allocation strategy prioritizes high return strategic growth with shareholder distributions comprised of a base positive dividend profile that's complemented with a variable share repurchase program. While we remain dedicated to preserving our investment grade credit designation, our free cash flow profile has fundamentally changed over the last five years. From an annual average of $540 million from 2011 to 2015 to currently $2.9 billion, we've strategically placed ourselves in a position of strength to have a sustainable capital foundation that provides the opportunity for meaningful strategic growth and strong shareholder returns, while maintaining investment grade metrics. We believe our track record proves itself with an average three-year after-tax return on invested capital of 32%, clearly a best-in-class performance across industries. We're squarely positioned for the continuation of sustainable, optimized, long-term value creation. Sustainability is also a significant part of our long-term value creation strategy, and we're dedicated to our people, our communities, and our environment. We're committed to operating our business with the highest integrity. In that regard, we remain excited about our joint venture with Aymium, a leading producer of renewable biocarbon products. We believe our first joint venture facility, which we plan to start operating late in the fourth quarter could decrease our steel Scope 1 greenhouse gas emissions by as much as 35%. We have an actionable path toward carbon neutrality that is more manageable and we believe considerably less expensive than they lay ahead for many of our industry peers. Our sustainability and carbon reduction strategy is an ongoing journey and we're moving forward with the intention to make a positive difference. We plan to continue to address these matters and continue our leadership role moving forward. Barry?
Barry Schneider: Thanks, Theresa. Our steel fabrication operations performed well in the first quarter, achieving strong earnings. At the end of the first quarter, our steel joist and deck order backlog was solid, extending through the third quarter of 2024. Additionally, current pricing has stabilized at historically high levels during the first quarter. We continue to have high expectations for the business. Continued onshoring of manufacturing coupled with infrastructure spending and fixed asset investment related to the IRA programs should provide momentum for additional construction spending later this year and through 2025. Our fabrication platform provides meaningful volume support for our steel mills, critical in softer demand environments, allowing for higher through cycle steel utilization compared to our peers. It also helps mitigate the financial risk of lower steel prices. Our metals recycling operations improved earnings in the first quarter as increased demand from North American steel producers supported higher ferrous scrap volume and the team continues to grow our volume and recycled aluminum in advance of us starting our new aluminum flat rolled operations. The North American geographic footprint of our metals recycling platform provides a strategic competitive advantage for our steel mills and for our scrap generating customers. In particular, our Mexican recycling operations competitively advantage our Columbus and Sinton raw material positions. They also strategically support increased procurement of aluminum scrap for our future flat rolled aluminum operations. Our metals recycling team is partnering even more closely with both our steel and aluminum teams to expand scrap separation capabilities through process and technology solutions. This will help mitigate potential prime ferrous scrap supply issues in the future will also provide us with a significant advantage to material increase the recycled content in our aluminum flat roll products and increase our earnings opportunities. The steel team had a strong quarter achieving near record shipments of 3.3 million tons. During the first quarter of 2024, the domestic steel industry operated at an estimated production utilization rate of 77% while our steel mills operated at 87%. We consistently operated higher utilization rates due to our value-added steel product diversification, our differentiated customer supply chain solutions and the support of our internal manufacturing businesses. The higher through cycle utilization of our steel mills is a key competitive advantage supporting our strong and growing cash generation capability and best-in-class financial metrics. Our realized steel pricing improved across our product portfolios. However, flat rolled prices weakened early in the first quarter before recovering in March and April. Value add flat rolled steel pricing spreads were incredibly resilient actually expanding during the same timeframe. Underlying demand remains steady, but customers are managing to a lower inventory level, which can cause some volatility in spot prices as order activity increased quarter-over-quarter, our steel backlogs also improved nicely from December to March across the platform. As for Sinton, the team continues to make significant improvements in operating efficiency and consistency. They averaged around 70% of capability for the quarter, breaking monthly utilization records across the lines in March. We are planning for Sinton to see additional improvements in production as the team took several maintenance days in April. Among other things in the outage, we resolved certain transformer limitations, which will allow us to access 100% of our melting capacity versus the previous 80%. Also, the additional two new value-added coating lines were successfully commissioned and have commenced operations with excellent results. These additional lines will support increased volume and margins as we head through this year. Regarding the steel market environment, North American automotive production estimates for 2024 were recently revised higher to just over 16 million units with continued growth expected in 2025 and 2026. This improved forecast is based on demand resilience and stronger production results as supply chain constraints continue to dissipate across the automotive supply chain. Automotive dealer inventories are also continuing to remain below historical norms. Non-residential construction remains solid as supported by the increased sequentially quarterly order activity and shipments in our structural and rail division. Additionally, onshoring and infrastructure spending should provide further meaningful support to fixed asset investment and related construction oriented projects in the coming years. As for the energy markets, the solar industry continues to grow and oil and gas activity is steady. However, increasing OCTG and line pipe imports created a challenging first core environment for the domestic producer. Looking forward, we are optimistic regarding steel demand and pricing demand for 2024.
Mark Millett: Good one. Thanks, Barry. Thanks, Theresa. While consistently strong through cycle operating and financial performance continues to support our cash generation and growth investment strategies. As mentioned, the four value add flat rolled steel coating lines are now online and in various modes of startup and certainly the line in Sinton was an absolute unqualified success. The team has done a phenomenal job there. And Sinton should see a step function improvement in operations and profitability as those two new lines ramp up after the April maintenance, which occurred actually two weeks ago that's -- they're up and running again. The aluminum strategy, our growth is especially compelling. Responses from existing and new customers across all markets remains incredible and only strengthening as we move forward. We are currently in discussions with numerous customers who wish to locate on site with us and this colocation strategy provides a sustainably competitive model for all of us, conserving time, money and reducing emissions across the supply chain. And this model has already proven itself tremendously successful in Sinton. And to just sort of review the project itself, 650,000 metric tons of aluminum flat roll capability in Columbus, Mississippi. The state-of-the-art plan, it has served the sustainable beverage and packaging sector, automotive and industrial markets as well. The roughly 300,000 metric tons a year of can stock about 200,000 tons of auto and 150,000 tons of industrial and construction. Actually, at the site in Columbus, we have a mill cap capacity of around 600,000 metric tons. And that will be supported by two satellite facilities, one out West around Gila Bend and one in Central Mexico, which are located in scrap ridge regions. We can capture the scrap, turn it into cast lab and transport it very, very effectively and cost efficiently to the mill itself. Expanded the project scope to include additional scrap processing and treatment to maximize aluminum recycled content. The metals recycling team has also developed a commercially viable sorting solution at volume for 5,000, 6,000 series of aluminum scrap, which represents an incredible competitive advantage for us. Our startup plans have not changed. Rolling mill should be operating mid-2025. The Mexico slab center, the end of 2024, and then Arizona mid-2025. The total project cost, including the recycled slab centers remains at $2.7 billion. With virtually all equipment and construction contracts complete, we feel confident in the expected amount of investment. We also are confident in the data add around about $650 million to $700 million of through cycle annual EBITDA, plus an initial $40 million to $50 million from the Omni platform as well. The investment premise, if you think about it, the market environment is similar to the domestic steel industry when we started SDI 30 years ago. They have older assets. They've had difficulty earning their cost of capital. So there's been little reinvestment, heavy legacy costs, inefficient and operations are typically high cost. And also a significant aluminum flat rolled supply deficit exists in North America, which is expected to grow. And this would be the first time we've ever entered a market where there's a supply demand gap. Pretty positive for us for sure. We have business alignment and we can leverage our core competencies of construction and operational knowhow. We can lever Omni's recycling footprint. As many of you know, we're the largest aluminum scrap recycler in North America. And again, we are developing some pretty exciting new separation technologies. So it's going to be cost effective. It's very, very high return growth for us. Moving on, we are in passion, I think, by our future growth plans, as they will continue to drive the high return growth momentum, we have consistently demonstrated over the years. We have the highest, most recent five-year average after-tax return on invested capital within the S&P 500 materials companies. And in the most recent three years, we have had an average of after-tax return on invested capital of 32%, which I think is a stunning number and an affirmation of the ability of all our team. Our disciplined and intentional growth strategy focused on differentiated value-added supply chain solutions to provide sustainable and growing cash generation. And we'll continue to do so in the future. So I'm incredibly optimistic moving forward. I believe the market dynamics are in place to support increased demand across our operating platforms in 2024. North America will benefit from continued onshoring of manufacturing businesses. And the U.S. will benefit from the allocation of public monies from the infrastructure program, the Inflation Reduction Act and other public programs. Steel Dynamics is levered to benefit from those programs through increased steel joist and deck demand, flat and long product steel demand and the associated higher demand for recycled scrap and aluminum. As I said earlier, our teams are our foundation. I thank each and every one of them for their passion and their dedication. We are committed to them, and I remind those listening today, the safety for yourselves, your families and each other is our highest priority. Our culture and business model continue to positively differentiate our performance, leading to best-in-class operating and financial metrics. We're no longer a simple steel company. We're an industrial metals business providing enhanced supply chain solutions to numerous industries that are essential to global economies. This differentiation and diversification mitigates cash generation volatility in all market cycles, as we've just seen in this past quarter. We are competitively positioned and continue to focus on providing superior value for our companies, for our customers, team members and shareholders alike, and we look forward to creating new opportunities for all of us today in the many years ahead. With that said, Matthew, could you open the lineup for questions, please?
Operator: Thank you. [Operator Instructions]. Your first question is coming from Martin Englert from Seaport Research Partners. Your line is live.
Martin Englert: Hello, good morning, everyone. Within steel, conversion costs appear to have declined a bit quarter-on-quarter, taking into account Sinton continue to ramp up and substrate costs going into 2Q, would you anticipated comparable reduction in the current quarter?
Theresa Wagler: Martin, the way that you and others are able to actually calculate what you call conversion costs is a little bit difficult. But yes, with the increasing production at Sinton, which we expect to continue to improve into the second quarter and second half of the year, you will see that the additional volume will help compress costs across the spectrum, but product mix is also something that you need to take into consideration when you think about flat versus long. But we would expect to see that the conversion rate, as you calculate it would continue to reduce. I can't speak to the exact magnitude thereof.
Martin Englert: Okay. Appreciate that. And thank you and congratulations on results.
Mark Millett: Thank you.
Operator: Thank you. Your next question is coming from Curt Woodworth from UBS. Your line is live.
Curt Woodworth: Yes. Thank you. Good morning, Mark and Theresa. A couple of questions on the Greenfield aluminum project. Can you kind of give us a time line on where -- when you think you could get to more of an EBITDA break-even level on the facility and what type of utilization rate you think you would need to achieve that? And then can you speak to what level of commercial commitments or arrangements that you've been able to achieve at this point? And then just lastly, I saw you kept the CapEx guidance flat at $2.7 billion, but obviously, there's been some concern just around general inflationary pressures. But do you feel -- are you seeing any upward pressure on the CapEx number? And are you pretty confident on keeping that number at $2.7 billion going forward?
Mark Millett: On -- I'll go backwards. That's the easier way. From a CapEx standpoint, as I mentioned in my sort of preliminary thoughts, virtually everything is now contracted out. We did, and you saw here some months ago, we did bump it up to that $2.7 billion with the knowledge of some inflationary pressures. Those are all baked in to that $2.7 billion, and we see no expansion on that number going forward. From a commercial arrangement perspective, we've been working obviously with the major sort of beer can or the beverage can consumers, we've been working with automotive as well. And we're pretty confident that we have the ability to match our customer demand with the ramp-up curve. As we also mentioned, operations should start mid-2025. There will be some qualifications early on. But we're confident that we can match the demand from those customers with that start-up ramp. From a standpoint of EBITDA break-even, I would imagine that come the end of the year, I would hope we are in that position.
Curt Woodworth: Okay. And then just a quick follow-up on fabrication. Last quarter, you talked about order entry improving and pricing continues to be stable. But obviously, there's still downward pressure in the business. Can you just give us a sense for maybe volumetrically, how you see things performing into 2Q? I know 1Q is always seasonally weak, and there was some weather-related disruption, but do you think you can get close to getting back to positive growth in fabrication? And then just in joists and deck in general, can you give us a sense for maybe how those products fit into some of these federal programs in terms of the CHIPS Act, IRA battery plants? Do you see any new sources of growth that could mitigate what's been somewhat of an air pocket on the warehouse side? Thank you.
Mark Millett: Yes. I guess the -- from our perspective, and I will let Theresa and Barry chip in here in a little bit, but yes, from a shipment standpoint in Q4 and early Q1, shipments kind of leveled off at pre-COVID levels. We've seen some general seasonality and there's some regional weather impacts here and there. But booking rates increased in March and are up again meaningfully in April. Backlogs are around about six months. So we personally consider that to be kind of a volume trough and we think things are going to move up, volume wise in the second quarter into the rest of the year. And I think the thing to emphasize there's only been slight quarter-over-quarter price erosion. And so for that to -- or that market strength to be there, I think it confirms our thesis that there's been a paradigm shift in through-cycle spreads. And I think we've got a very, very, very constructive view of the long-term prospects for fabrication.
Theresa Wagler: I think something that I would point out in addition to what Mark said. If you look at -- and take into consideration that volumes are, to Mark's point, at a pre-COVID level, but earnings were still, from an operating income perspective about over $1,200 per ton. If you looked historically in a very strong market, that number might have been $150 to $200 per ton. So structurally, there has been a significant difference, and it is proving out the theory that we had if there's a structural shift. Barry, maybe you want to talk a little bit about how the programs actually go into the public dollars.
Barry Schneider: A lot of these public the CHIPS Act to the IRA Act, there's a lot of work that has to happen upfront. And once those projects are -- owners are identified and engineering companies are identified, that's when this starts flowing into all the steel products, but specifically, when we look at the joist and deck, once it's a concrete kind of a plan on what's going to be built, the timeline is actually pretty quick. So when those orders start to be in place, it's typically in a kind of a three to six-month window, when they start shipping. So we're encouraged by what we hear, what we communicate through the general contractors, the fabricators out in the marketplace. So again, we have a good reason to believe the second half of the year fills up nicely with these projects, as they start moving from conceptual phase to actually enter in construction phases.
Operator: Thank you. Your next question is coming from Carlos De Alba from Morgan Stanley. Your line is live.
Carlos De Alba: Yes. Hi, good morning, Theresa, Mark. Just maybe continuing with the discussion. The long steel volumes declined quite sharply or meaningfully year-on-year. Can you maybe provide more color as to the different end markets within construction and infrastructure that may be leading to this decline? Clearly the backdrop for the coming years for sure is quite solid. But at least in the first quarter, the numbers just weren't there. So any color on the different construction markets would be great.
Barry Schneider: Carlos, I would say, as you look at the mix across line products, as we make sections that are lighter sections that's more responsive to what the marketplace is right now. So we've had a pretty robust level of order input. And structural rail has performed pretty well. We tend to balance between our rail production and our structural production. And I think in general, I would say the market space has changed from one of where a lot of more fabricators were directly going to mills to more of a service center type relationship. And that's, again, a more historical way to go into the market, after the busy years for the last several years with construction spending. So we see a good response from our customer base, and we have healthy backlogs in our long products right now.
Carlos De Alba: Got it. Thank you, Barry. And if I may ask another one on the aluminum project. Have you been able to already secure contracts with some of your customers or that still undergoing in terms of discussions with them?
Mark Millett: Carlos, that's still on a discussion. Obviously, it's a -- we're a new mill. And so there's a balance between them making sure that they feel confident that the volume is going to be there. But as I said earlier, we have commitments in place that will support in large part, support the first 12 months to 18 months of our ramp-up.
Operator: Thank you. Your next question is coming from Timna Tanners from Wolfe Research. Your line is live.
Timna Tanners: Hey, good morning, guys. I'm going to ask Carlos' question a different way, if you don't mind, on the long product side. The volumes, as I see them, were sharply down from last year and the year-ago period in the first quarter. So I guess, it sounds like from the answer, you're still seeing quite strong demand. So I guess should we expect that this was a blip and that maybe there were some weather-related reasons and the rest of the year could be more consistent with past years? Or is there something that's changed in your outlook for the long products across structural bars, those all those divisions would be really helpful. Thanks.
Mark Millett: Well, I think it's in large part, sort of the seasonality and just the weather-related issues, Timna. The -- and you saw some price adjustment here in the marketplace, whatever that was, two months ago, six weeks, eight weeks ago. And again, that wasn't necessarily market pressure that was just absorbing sort of some discounting that leaked into the marketplace over the prior month, two months. We feel confident moving forward for the rest of the year in that space.
Timna Tanners: Okay. So maybe particularly challenging first quarter and rest of the year looks solid, it sounds like. All right. And my other question, if I could was just, if you could remind us about the cadence of contribution from the four new lines, the paint lines and the galv lines and how to think about increasing volume and profitability would be great. Thank you.
Barry Schneider: Yes, Timna, the -- all four of the process lines at this point have actually run product. We staged the start-up to best utilize our teams and also to really focus on improving the start-up process for the other lines. So a paint line in Tahoe is up and running well, shipping prime product. We expect that that ramps up through second quarter, third quarter, getting up closer and closer to what the final production will be. On the converse, the new galvanizing line down in Sinton actually started up very well. It started up in January is solidly contributing at a very high rate already, which, as Mark said, the team has done a fabulous job getting that line making quality like that so quickly. We have an all hands on deck approach. So all the other mills are supporting the team. And we're continually moving people through to keep the energy high. So I see the second galvanizing line in Tahoe coming up Q2 into more operational status and progressing to the end of the year. The paint line through Q2 through Q3 at Tahoe. And then the new paint line in Sinton, Texas will actually be maturing to the end of the year, so all four units will be contributing soundly in second quarter. And progressing through the third, fourth quarter.
Operator: Thank you. Your next question is coming from Katja Jancic from BMO Capital Markets. Your line is live.
Katja Jancic: Hi, thank you for taking my question. On Sinton, can you provide a bit more color how we should think about the utilization rates in the rest of the year?
Barry Schneider: As we had talked, we're about 70% through first quarter. We did take some time for a significant outage in April that was planned to among other things, address the power problem we had with the primary side voltage at the plant. So we see a really good path to 80% progressing through operational by the end of the year, getting up in the capacity. In front of us, we see better and better performance, routine performance every day. So as the team encounters challenges, they work through them quicker. And through all this, they remain a very safe operation, which is so important during start-up. So the team is in place, the new assets will allow us to provide the best mix possible upstream so that the efficiency of the plant can really be explored further. So we continue to be very robust on where we're going and the success of the team.
Katja Jancic: Maybe I missed this, but was there a power issue during the first quarter?
Barry Schneider: We had talked about the primary side power last year and having some transformers that needed to be replaced. And that equipment is very long lead times. Our team was able to secure some shorter-term solutions that we've engineered into place and done the construction. So now that the outage is over, we could put that equipment in with the power off, we look to bring the new transformer support, so that the plant has full operation of capacity. We've been internally limited at about 80% of the power capability on the melting furnaces. So at this point now, this will help us remove that restriction. Where it's finally utilized, it will be somewhere between now and the end of May. But this April outage was key to give us the opportunity to get the construction done to work on the high-voltage bus. It requires the whole plant to be -- have the power off. So again, great work happening. It's unfortunate. These are long lead time items. And we've remedied the situation that we believe contributed to it. So we're very excited this problem will be behind us here shortly.
Operator: Thank you. Your next question is coming from Lawson Winder from Bank of America. Your line is live.
Lawson Winder: Thank you, Operator. Good morning, Mark, Theresa, Barry. Thank you for today's update. Could you share with us your views on the CRC, HRC spreads that have been quite robust recently? What are your thoughts on what's driving that? And I know you don't like to guide to pricing, but what are your -- I'll try this one and ask what your thoughts are on, what that might look like going forward?
Mark Millett: I will start. I would just reiterate what I've always said in past calls; coated products are gaining more and more market share just generally. And there are some pretty dynamic changes within the marketplace that is even added to that. If you think about the solar -- solar market, which is absolutely huge today. You're consuming around about 25 tons of coated product per megawatt. And again, we're selling Nextracker and a whole bunch of folks, I think was something like 300,000 tons a year or thereabouts or even higher into that marketplace. And that's coated flat roll, people turn that into tubes for the support structure of solar. So there are more and more applications being served by coated products today. It's a tight market, and it's supporting the higher spread.
Barry Schneider: I'd like to add to that, Mark, too, that the teams have been diversifying our coated profile. So we have many different kinds of coatings that we offer. And those various product lines provide a very good supply solution to our customers. So the whole supply chain has been maturing for these products, and it allows us to move our tons to balance our production needs, as well as where the markets are interesting. So we continue to believe that the spreads between coated and hot roll are -- will be attractive. And it's an area where we've really invested quite a bit of money over the last several years to make sure we have the right capabilities at our disposal and the right supply chain solutions for what the customers are asking for.
Lawson Winder: Maybe if I could just ask a follow-up on your -- you've provided some commentary on fabrication order backlog and then the pricing on that. And you indicated it was above pre-COVID levels. Maybe if I could just try to get a little bit more color on that. Would it be fair to say that pricing in your new bookings and backlog, at least are converging to some level and perhaps ask how that might compare to 2023 levels?
Theresa Wagler: Lawson, I don't think that we're talking about comparing to 2023 levels. I don't know if you were speaking specifically about pricing, if you were speaking about volume? But the pricing that's in the backlog and the current spot pricing that we have, they are converging to your point, which would be expected as pricing stabilizes.
Lawson Winder: Okay. That’s exactly what I was looking for. Thank you very much.
Operator: Thank you. Your next question is coming from Tristan Gresser from BNP Paribas (OTC:BNPQY). Your line is live.
Tristan Gresser: Yes. Hi, thank you for taking my questions. Maybe a quick follow-up just on the fab business. It was my understanding, we should have seen some further moderation in ASP in Q2. You talk about the backlog stability and forward pricing, et cetera. So is this still the base case and that we should see another leg down in Q2, before we stabilize?
Theresa Wagler: Hey Tristan, hi, this is Theresa. We're not specifically giving guidance on any of our segments from an earnings perspective. We don't do that, but I'll talk to you about certain levers. So we do expect, as Mark said earlier, and you would see this normally, but we will have higher on volumes, both across fabrication steel and mills recycling, as we move through the year, which is generally the case in the second, third quarter environment as you move out of the seasonality into stronger demand periods. So we absolutely expect to see that. There's also the potential for additional support that we believe will be there as it relates to the public funding, probably more specifically in the second half of the year and then even more impactful, at least in my opinion in 2025, which will help provide demand -- fixed asset demand-driven increases in volumes. As it relates to the pricing and fabrication, we said that the change or the differential in pricing should start to diminish as it's been stabilized, really starts stabilizing in middle of the fourth quarter. And certainly remains so in kind of January, March, February -- sorry, January, February, March time frame. So you need to take a view on that price differential that we've kind of just helped explain and then on the steel input costs. So they keep about eight weeks -- very probably about 8 weeks of inventory, principally flat rolled on the ground. So as that pricing has changed in the first quarter, those input costs will move into the second quarter as well?
Tristan Gresser: Okay. That's really helpful. Thank you. And maybe another question on the situation in Mexico. You kind of have a unique perspective there, you sell quite some volumes in the country, you're building in the country, but you're also a U.S. steel producer first. So I mean, the situation in the U.S., Mexico situation kind of worsen a bit on the trade front -- talks of tariffs, retaliation. So what's your view on the latest development? Do you believe that the situation could worsen? And what’s -- what are kind of your option if it does happen?
Mark Millett: Well, today, we haven't seen any -- I don't believe, Barry, any direct impact to our business. We grew substantial market share in Mexico last year. We shipped, I think, 600,000 tons or so down there. I think it's more of a wait-and-see situation. It's sort of a tit for tat, going back and forth. But I think again, just as you saw with the USMCA some years ago, the U.S. and Mexico are huge trading partners, and these things get worked there.
Tristan Gresser: All right. That's -- that's clear. And maybe just the last one. You mentioned in your outlook in your prepared remarks that you expect lower imports. Can you discuss that a little bit? And there have been some discussion at the high level between the U.S. and Europe of potential carbon-based tariffs. Do you believe that's still on the table and that could potentially materialize depending on who is the next President in the United States? Thank you.
Barry Schneider: Well, I think our position on the carbon border adjustment mechanisms; we don't see any meaningful change in American policy. There definitely is a lot of interest in Europe and the EU will continue to go-forward with their plans. After the election, we would expect that there will be some kind of a united front to find out how to keep trading with Europe. We do believe that's a good thing for us as these develop, particularly with our incredibly low sustainability position. So we have a great position to lead into these kind of tariffs. We do see certain coated products moving into the country that are concerning. And as we address those through our downstream distribution and our customer base, we are aware of where certain products are moving in the country. And we do see certain areas where it's elevated. And we're doing our best to respond to that competitive challenge, as other economies kind of flush towards us when they get soft where they are. So we're always monitoring it. There are solutions we'll look at, but we take that on a day-by-day basis.
Operator: Thank you. Your next question is coming from Bill Peterson from JPMorgan. Your line is live.
Bill Peterson: Yes. Hi, good morning, and nice job on the quarterly execution. I wanted to talk about some of the reshoring trends but -- and also the data center build-out. So you've obviously seen a big uptick in data center. But on the same side, we've seen obviously warehouses continue to kind of remain negative. So I guess the question is what is the typical steel intensity you see of data centers? And how does that opportunity compared to a warehouse opportunity? That again, since that's kind of normalized here recently?
Barry Schneider: Bill, this is Barry. I think each project is so different. There's a lot of variables. And we provide materials to all these different types of projects. So depending on what the owner is looking for, where the data center might be located, that will affect the steel intensity. But generally, the packages aren't wildly different than warehousing. And it really depends on where they're going to go and who's designing it. So that flexibility in providing the way we look at lots of different general contractors and lots of different engineering firms. We have solutions for each of them. So as they go, they might be -- maybe think of it maybe it's a less steel-intensive job, but it might have more design work involved. And the opposite may be true where -- it's a straightforward design work in bigger tons. So it's really a broad spectrum across these different projects. So depending on each one, it's really hard to say. But it is definitely an area where there continues to be interest because of the artificial intelligence, all the thoughts about what's going to be needed for that cloud computing. And so we remain very interested in there, trying to provide good solutions to the various stakeholders who are building those facilities.
Bill Peterson: Okay. So I guess it just really depends on the project. If I could ask a second question maybe to Theresa. So CapEx came in a bit lower than expected. But I guess, how should we think about the cadence of CapEx through the remainder of the year, presumably to reach the $2 billion number you've provided in the past?
Theresa Wagler: Yes. Good morning. The biggest chunk of capital will relate to, obviously, the aluminum investment. And we would expect to see those tick up in the second and third quarter, as equipment continues to arrive and they hit certain milestones. So you should see the bulk of that additional CapEx or remaining CapEx being in the second and the third quarter, probably about equal and then probably go down to about the same level you saw in the first quarter and the fourth quarter.
Operator: Thank you. Your next question is coming from John Tumazos from John Tumazos Very Independent Research. Your line is live.
John Tumazos: Thank you. I see that you're not staggering the three aluminum slab melt shops, with one or two of them to follow. Does that mean that you have a lot of customers pent-up already for the aluminum rolling mill and that you're concerned that you need the raw material because it might sell out fast? Or is Mexico slab mill getting sequenced first, because your scrap collection is very advanced in Mexico? And is there a concern that that might take a little longer to develop the scrap flow in Arizona in Mississippi?
Mark Millett: Well, I wish it was all absolute strategic, but some of it is just luck or bad luck, John. But firstly, the satellite mills will or slab plants will be pretty well focused on UBC. And so the Columbus mill itself will have to produce the 5,000, 6,000 automotive stuff and some of the industrial stuff. So the Columbus mill shop, at least one or two of the furnaces will come up reasonably early. We're focused on SLP or the Mexican facility, to be honest, because that one, the property was purchased first. Everything went incredibly well. The permitting went incredibly well. And it just is in line. Our property in Arizona, to be honest, had some initial permitting, I would say, slowdown. I mean it's just a bureaucracy delayed that facility by several months.
John Tumazos: So it's fair to be lucky than smart?
Mark Millett: I've been -- I won't tell you the language my dad used some time ago, but they call me a lucky critter, let's just put it that way. And I've been lucky all my life, and you need luck in life. So -- and the biggest luck I have is being surrounded by a phenomenal team, to be honest, so.
Operator: Thank you. That concludes our question-and-answer session. I'd like to turn the call back over to Mr. Millett for any closing remarks.
Mark Millett: Super. Thank you, Matthew, and thank you for those that remain on the call and even greater thanks for those that support us in our shareholders. For us, hopefully, we've articulated that we have a very, very constructive near-term on the markets, the start-up at Sinton and other sort of growth opportunities, the four lines. I think what makes us even more excited, to be honest, is just our long-term competitive position. We are the one of the most efficient lowest-cost producers in the world. We have a very balanced I think, product portfolio and a very balanced kind of circular manufacturing profile. So we've got a lot of pull-through volume from our downstream from fabrication and from our conversion plants. So -- and that amounts to about 2 million tons a year today. So the pull-through volume is very, very strong. It allows us for that the highest and more uniform cash generation through cycle. I think Barry said, we were at 87% utilization, when the industry is at 77%. And that's been a historical norm for us. And I believe the -- our position in -- from a sustainability carbon footprint perspective is a huge, huge advantage. And I don't believe everyone understands it. Our flat roll mills are reportedly and not us reporting it, but our automotive -- European automotive manufacturers are suggesting that our two current mills Butler and Columbus, they are likely the lowest carbon footprint of any sheet producers in the world, and Texas is going to be somewhat similar. So that's allowing us to gain huge market traction, certainly in automotive. We actually have more interest than we can support today in that arena. And if you look at the fact that we're already here and the rest of the world is spending billions and billions of dollars to get to where we are. In recent discussions with a couple of different European companies, which suggested to us that just the -- their conversion from blast furnace to electric arc furnace and the DRI facilities. It's likely going to increase the conversion cost by $200, $250 a ton. And if you think about where that puts us on the global cost curve, we will be absolutely at the very bottom, and it's a very envious position to be. But most importantly, long-term, we would suggest that it supports much higher through-cycle spreads. We've seen it in recent years that's going to continue our earnings are going to be positively impacted by it. So incredibly excited for SDI going forward. For those, again, employees on the call, thank you, each and every one of you for everything you do each and every day. We can't be here doing what we do without you. And you all put in a tremendous quarter and truly sort of punctuated the positive combination of culture and technology in creating the best financial metrics of any steel company, I think, in the world. Thanks to our customers. Again, we can't do it without you and our service providers and everyone else, just thank you for your support. Have a great day.
Operator: Once again, ladies and gentlemen, that concludes today's call. Thank you for your participation, and have a great and safe day.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.