AGCO Corporation (NYSE: AGCO), a global leader in the design, manufacture, and distribution of agricultural equipment, reported a significant downturn in its third-quarter earnings call on November 1, 2024. The company's net sales saw a 26% decline, with sales dropping approximately 25% and an adjusted operating margin of 5.5%. Despite the industry contraction, AGCO is aggressively reducing inventory and production costs and is focusing on growth strategies like Fendt brand expansion, precision agriculture, and parts business. The company also announced a restructuring plan to achieve substantial cost savings by mid-2025.
Key Takeaways
- AGCO's sales decreased by about 25%, with an adjusted operating margin of 5.5%.
- The company is aggressively cutting inventory and production costs due to industry downturn.
- Growth strategies include Fendt brand expansion, precision agriculture, and parts business.
- AGCO is aligning dealer inventories to around three months, with further production cuts expected.
- The company launched the Outrun Retrofit Autonomy Kit and aims for fully autonomous farming by 2030.
- Financial forecasts for 2024 include a net sales outlook of $12 billion and adjusted EPS of $7.50.
- AGCO maintains a long-term capital allocation strategy with a free cash flow conversion target of 75% to 100% of adjusted net income.
Company Outlook
- AGCO is committed to precision Ag technology and innovation despite market challenges.
- The company's restructuring plan is on track to deliver $100 million to $125 million in cost savings by mid-2025.
- AGCO plans to reduce production hours by 25% year-over-year for 2024, with further cuts in 2024 and 2025.
Bearish Highlights
- The agricultural sector is experiencing a significant downturn after profitable years from 2021 to 2023.
- Net sales for Q3 2024 declined by 26% compared to the previous year.
- Adjusted operating margins fell by 710 basis points due to lower production and increased discounts.
Bullish Highlights
- AGCO aims to enhance Fendt market coverage to over 80% by year-end.
- The company is focusing on globalization and expanding its global parts business and Precision Ag offerings.
- The Outrun Retrofit Autonomy Kit has been launched as part of a strategy for fully autonomous farming by 2030.
Misses
- Full-year net sales outlook has been revised to $12 billion, down from previous estimates.
- Adjusted EPS projection for 2024 is now $7.50, reduced from $8.
- AGCO foresees a slight decline in market performance for 2025, particularly in South America and North America.
Q&A Highlights
- Management discussed ongoing challenges with CNH's transition away from Trimble.
- There is a focus on maintaining core business and providing resolutions to the largest shareholder, TAFE.
- The company is cautious about the 2025 outlook, given low agricultural market indices.
AGCO Corporation, during its earnings call, laid out a clear strategy to navigate through the current industry downturn. The company is taking decisive action to adjust production and inventory levels while focusing on innovative technologies that promise to shape the future of agriculture. As AGCO continues to refine its operations and product offerings, the market will be looking towards the December 19 Analyst Meeting for further updates on the company's long-term goals and strategies.
InvestingPro Insights
AGCO Corporation's recent financial performance aligns with the challenging market conditions outlined in the earnings call. According to InvestingPro data, AGCO's revenue growth for the last twelve months as of Q3 2024 declined by 13.34%, with a more pronounced quarterly revenue drop of 24.78% in Q3 2024. This data corroborates the company's reported 26% decline in net sales.
Despite the downturn, AGCO maintains a strong financial position. An InvestingPro Tip highlights that the company's liquid assets exceed short-term obligations, indicating a solid balance sheet that could help weather the current industry contraction. This financial stability supports AGCO's ability to implement its restructuring plan and pursue growth strategies in precision agriculture and brand expansion.
The market's reaction to AGCO's challenges is reflected in the stock's recent performance. InvestingPro data shows a 10.23% price decline over the past week and a 7.41% drop over the last month. This aligns with the InvestingPro Tip noting that the stock has taken a significant hit recently, likely due to the lowered financial outlook and industry headwinds discussed in the earnings call.
Interestingly, despite the current challenges, AGCO has maintained its commitment to shareholders. An InvestingPro Tip reveals that the company has raised its dividend for 11 consecutive years, demonstrating a long-term focus on shareholder returns. This consistent dividend policy, coupled with a current dividend yield of 4.06%, may provide some reassurance to investors during this period of industry contraction.
For investors seeking a more comprehensive analysis, InvestingPro offers additional insights with 10 more tips available for AGCO. These tips could provide valuable context for understanding the company's position in the evolving agricultural equipment market.
Full transcript - Agco (NYSE:AGCO) Q3 2024:
Greg Peterson - Head of IR:
Eric Hansotia - Chairman, President and CEO:
Damon Audia - SVP, CFO:
Jamie Cook - Truist Securities:
Kristen Owen - Oppenheimer:
Stephen Volkmann - Jefferies:
Joel Jackson - BMO Capital Markets :
Mig Dobre - RW Baird:
Tami Zakaria - J.P. Morgan:
Operator: Good day, and welcome to the AGCO Third Quarter 2024 Earnings Call. All participants will be in a listen-only mode. [Operator Instructions] Please note, this event is being recorded. I would now like to turn the conference over to Greg Peterson, AGCO Head of Investor Relations. Please go ahead, sir.
Greg Peterson: Thanks, and good morning. Welcome to those of you joining us for AGCO's third quarter 2024 earnings call. We will refer to a slide presentation this morning that's posted on our website at www.agcocorp.com. The non-GAAP measures used in the slide presentation are reconciled to GAAP measures in the appendix of that presentation. We will make forward-looking statements this morning, including statements about our strategic plans and initiatives, as well as their financial impacts. We'll discuss demand, product development, and capital expenditure plans, and timing of those plans, and our expectations concerning the costs and benefits of those plans, and timing of those benefits. We'll also cover future revenue, crop production, farm income, production levels, price levels, margins, earnings, operating income, cash flow, engineering expense, tax rates, and other financial metrics. All of these are subject to risks that could cause actual results to differ materially from those suggested by the statements. These risks include, but are not limited to, adverse developments in the agricultural industry, supply chain disruption, inflation, weather, commodity prices, changes in product demand, the possible failure to develop new and improved products on time, including premium technology and smart farming solutions within budget, and with the expected performance and price benefits, difficulties in integrating the PTx Trimble business in a manner that produces the expected financial results. Reactions by customers and competitors to the transaction, including the rate at which PTx Trimble's largest OEM customer reduces purchases of PTx Trimble equipment and the rate of replacement by the joint venture of those sales. Introduction of new or improved products by our competitors and reduction in pricing by them. The war in the Ukraine, difficulties in integrating acquired businesses and in completing expansion and modernization plans on time and in a manner that produces the expected financial results and adverse changes in the financial and foreign exchange markets. Actual results could differ materially from those suggested by these statements. Further information concerning these and other risks is included in AGCO's filings with the Securities and Exchange Commission, including its Form 10-K for the year ended December 31st, 2023 and subsequent Form 10-Q filings. AGCO disclaims any obligation to update any forward-looking statements except as required by law. We will make a replay of this call available on our corporate website. On the call with me this morning is Eric Hansotia, our Chairman, President and Chief Executive Officer, and Damon Audia, Senior Vice President and Chief Financial Officer. With that, Eric, please go ahead.
Eric Hansotia: Thanks, Greg, and good morning. I wanted to touch on a few highlights from AGCO's performance against the backdrop of the cyclical downturn we're seeing in the industry before I get into the results for the quarter. 2024 has brought a significant contraction in the Ag industry compared to the highly profitable years farmers saw from 2021 to 2023. The significant contraction is not uncharacteristic of prior downturns. What is different this time is how we are addressing it. We are focused on reducing inventory and cutting production faster than in prior downturns. We have been much more aggressive in reducing costs to better align our operations with the weak market environment. Despite these challenges, we remain focused on being the most farmer-focused company in the industry. Our three high margin growth levers, which include the Fendt, Full-line Globalization, Precision Ag, and parts are central to this commitment. Although this quarter was challenging in some ways, we are confident that the steps we are taking along with these growth engines will help us deliver higher trough margins than before and will increase the durability and resilience of AGCO's earnings through the cycle. The thoughtful and efficient growth of our North America Fendt distribution network through our farmer core model is progressing. We saw dealer consolidation in Ohio, Missouri, and Wisconsin in the quarter. These new locations can serve farmers on the farm where they want to do business with the mobile fleet approach to sales and service. In addition, through the farmer core approach, AGCO dealers have also expanded their presence in Louisiana and Georgia. We are now on track to improve Fendt market coverage to over 80% this year. The momentum for Fendt continues as dealers and farmers recognize the value of the Fendt full line of products. This was evident in the third quarter when major AGCO dealers across five U.S. states in the Midwest adopted our Fendt full line strategy. They removed competitive harvesting product lines and selected the Ideal Combine as their preferred product offering to help farmers maximize performance during their harvest. This is yet just another example of the opportunities ahead for us as more and more farmers see the value of our industry-leading and award-winning Fendt products. Fendt's improved distribution and technology-rich full product line has been translating into improved market share, particularly in Europe this year. Also, the rebuilding of the PTx Trimble dealer network remains a top priority for us. Over the past several months, hundreds of dealers have signed distribution contracts directly with PTx Trimble to continue serving their customers with the innovative products they are seeking. Although sales and margins for PTx Trimble have been lower than we expected this year, given the rapid decline in our industry, we are energized to continue integrating, innovating, and growing the PTx portfolio of products and services. Leveraging the strength of the PTx Trimble portfolio along with a farmer-first mindset and award-winning products from Precision Planting and our equipment brands, we are poised to reach new heights. I want to reiterate that AGCO's unique retrofit strategy allows us to offer an industry-leading suite of advanced technology solutions for farmers around the world looking to save on inputs or increase yields, regardless of their brand of equipment. This is especially impactful in a year when farm income is down, and we can help farmers with new technology at a lower price than a brand new piece of equipment. Finally, I want to take a moment to extend my sincere thanks to the Grain and Protein team for their hard work during the past year with the completion of the divestiture on November 1st. We couldn't have done it without them. I wish them well and look forward to their continued success. This portfolio change supports our strategic transformation and allows AGCO to focus on core agricultural machinery and precision Ag technology. The PTx Trimble joint venture addition and the Grain and Protein divestiture are major strategic shifts that will provide margin tailwinds for AGCO over the long term. Let's transition now to AGCO's third quarter performance on Slide 3, which shows our sales down approximately 25% and an adjusted operating margin of 5.5%. Lower sales and reduced operating leverage related to significant production cuts and a difficult pricing environment were the primary factors in our lower margins this quarter. In this environment, AGCO continues to focus on controlling the things we can manage. The restructuring announced in June is progressing well and we are continuing to explore new ways to leverage technology and global centers of excellence to optimize our operating model. Since the announcement, we have begun to see some of these savings materialize this quarter and we are confident in achieving the full $100 million to $125 million of run rate cost savings midway through 2025. The biggest challenge for AGCO this past quarter was destocking the dealer inventory channel. Despite the significant production cut in quarter three 2024, which was the largest year-over-year AGCO cut has ever taken in over a decade, the market conditions have made the outlook more challenging. I want to touch on these details later, but I wanted to provide some context for now on how we're aggressively trying to right-size dealer inventories. Slide 4 details industry unit retail sales by region for the first nine months of 2024. Global industry retail sales of farm equipment continued to be weak in all of AGCO's key markets. North American industry retail tractor sales decreased 11% for the first nine months of 2024 compared to the first nine months of 2023. Sales declines were relatively consistent across the horsepower categories, with higher horsepower categories declining more in recent months. In Western Europe, industry retail tractor sales decreased 6% during the first nine months of 2024 compared to the first nine months of 2023. South American industry retail tractor sales decreased 9% during the first nine months of 2024 compared to the first nine months of 2023. Demand in Brazil was negatively impacted by the floods in Rio Grande do Sul, where while a challenging first harvest in the Cerrado region continues to affect farmers buying behavior. Following three strong years of retail demand in South America, it's expected to remain soft in 2024 as a result of lower commodity prices and weaker farm income. The combine industry was down significantly in all regions through the first nine months of 2024, ranging between 19% and 35% down year-over-year depending on the region. Despite the current down cycle of the agricultural industry, AGCO is well positioned to capitalize on the long-term growth in our sector. Farmers are being asked to produce more crops with fewer acres as the world's population grows and food security becomes increasingly more important. We have also taken decisive steps to focus our product portfolio on precision Ag technology with the PTx Trimble joint venture and Precision Planting, complemented by an industry-leading machinery that is the best in AGCO's history. While commodity prices are down compared to the recent past, the cost of farm inputs have also come down, though not to the same degree. With AGCO's tech stack, farmers can further reduce their expenses with precise application of fertilizer, seeds, and by leveraging data analytics with our tools. AGCO's mixed fleet retrofit solutions typically offer a one to two-year payback and are available at a significantly lower cost compared to buying a new machine. AGCO's 2024 factory production hours are shown on Slide 5. Our production decreased in the third quarter by approximately 35%, which was 19% more than we anticipated in our third quarter guidance. Significant reductions were made in all regions, with the biggest reductions occurring in South America and North America. Reducing dealer and company inventory remains a key priority for us, as the market continues to soften. While we have brought dealer inventory down by 6% on a unit basis, sequentially from quarter two to quarter three with our significant production cuts, further weakening end market retail demand has resulted in an increase in months of supply on a forward-looking basis. In response, we are cutting production even further. Our new 2024 production guidance now reflects a 25% year-over-year reduction in production hours. Even with this more aggressive reduced production schedule, our current outlook for 2025, North America and South America, will likely result in production less than retail demand in the first part of 2025. Diving into the regional breakdown, in Europe tractors have approximately three months of orders, which is down from last quarter. Dealer inventories rose roughly half a month and are now closer to five months of supply, above our target level of four months. Massey Ferguson and Valter dealer inventories are a bit higher and Fendt a bit lower than the average, in part due to strong share gains on Fendt. In South America, we have order coverage through December 2024, where we continue to limit our orders to one quarter in advance due to inflationary pressures. Despite our aggressive production cuts and the reduction in the number of units at the dealers, our 12-month sales outlook results in around five months of dealer inventory across all products, as the industry conditions continue to remain weak. Our goal is to have around three months of dealer inventory, which will likely require further reduced production in 2024 and 2025, based on the current environment. In North America, we currently have approximately four months of order coverage. Smaller rural lifestyle equipment has the lowest order coverage, while bigger equipment is higher. Like the challenge in South America, our dealer inventory increased by one month compared to last quarter, as industry conditions have continued to weaken and is now approximately nine months of supply. Our North American targets for dealer inventory range from four to six months, depending on the product. We will continue to focus on under producing retail demand, coupled with retail market share execution to bring dealer inventories in line with our targeted range. The current environment result in lower production levels in the fourth quarter and in 2025. Moving to Slide 6, where you'll see our three high margin growth levers aimed at improving our mid-cycle operating margins to 12% and outgrowing the industry by 4% to 5% annually. To reiterate, these three growth levers are, number one, globalization and full-line product rollout of our front brand. Number two, focusing on accelerating our global parts business and increasing the market share of genuine AGCO parts. And number three, growing our Precision Ag business. We continue to execute on each of these initiatives, and I wanted to highlight a few of the most recent new product introductions supporting our growth plans. Slide 7 spotlights the products we have brought to North America market at the Farm Progress Show in late August. On the technology front, we officially launched the Outrun Retrofit Autonomy Kit, available through PTx Trimble. Outrun is the first commercially available autonomous retrofit grain cart solution in the market, and the latest offering that demonstrates our commitment to retrofit first and mixed fleets? The autonomous grain cart allows a single combine driver to operate two pieces of machinery simultaneously. The combine driver can stage the autonomous tractor on the field, call the tractor so it can pull alongside the combine and receive the grain on the go, and finally send the tractor to an unload zone, all without requiring a driver in the tractor cab. The Outrun hardware is available initially on two tractor brands with more to follow. This kit will be the backbone of AGCO's system to allow fully autonomous solutions across the crop cycle by 2030. This is just the first step of many. As we showed at our technology days earlier this year, we are already working on the next phase where the combine can operate two grain carts simultaneously. As more phases of the crop cycle are automated, the same Outrun hardware can be used, which allows for a simple unlock from a farmer standpoint. This product will also bring AGCO a recurring revenue stream where farmers will be billed for every active task hour where the tractor is running in autonomous mode. Farmers can purchase hours a few different ways. Pay-as-you-go, Hourly Bundle, or Unlimited. We're very excited about this launch and helping farmers drive increased efficiency during one of their most critical points in the season. On the machinery side, North America is getting several new products in the coming year, starting with the new Massey Ferguson 9S tractor, which completes Massey Ferguson's tractor lineup. This new product delivers an industry leading cost of ownership experience for our farmers through field proven technology, better dependability and better fluid efficiency. The MF 9S enables our dealers to deliver a solution for farmers that optimizes yield, reduces operator training and enhances field efficiency. We also launched the Fendt 600, which brings an uncompromising product that perfectly blends power and versatility. It's a great option for those looking for a machine that can handle a wide range of jobs from the row crop farming, to loader work, to transport and anything in between. And finally, the new Gleaner T-Series Combine has been refreshed, offering a lightweight performance, superior control and premium grain quality for the best value in farmer's fields. This straightforward and dependable product complements our premium Fendt Ideal Combine in North America and allows our dealers to offer several options to their customers. As I mentioned earlier, AGCO's product lineup is the best it's ever been. The innovation and performance of these new offerings is a testament to our continued investment in R&D over the years and our farmer first focus. I'll now hand it over to Damon to walk you through some of the financials from the quarter.
Damon Audia: Thank you, Eric. And good morning, everyone. Slide 8 provides an overview of regional net sales performance for the third quarter. Net sales were down approximately 26% in the quarter compared to the third quarter of 2023 when excluding the negative effect of currency translation and positive impact of acquisitions. By region, the Europe Middle East segment reported sales down roughly 21% in the quarter compared to the same period in 2023, excluding the impact of favorable currency translation and favorable impacts of acquisitions. Sales were down in nearly all countries with declines in France, Germany and Italy showing the largest reduction. The product segments showing the most significant declines were mid-range tractors, high horsepower tractors and hay equipment. Parts showed modest growth. South American net sales decreased approximately 44%, excluding the impact of unfavorable currency translation and favorable impact of acquisitions. The market continues to be very challenged and we continue to under produce relative to retail demand. Tractors, combines and implements all showed large reductions. In the quarter, there was significant negative mix year over year as the high horsepower segment of the tractor market underperformed the medium and low horsepower segments. The Brazilian market was down the most while Argentina was modestly down. Net sales in North American region decreased approximately 22% excluding the impact of unfavorable currency translation and favorable impacts of acquisitions. Lower farm income continues to pressure farmer purchasing behavior. High horsepower tractors and hay equipment saw the largest declines. Net sales in Asia Pacific Africa decreased 15% excluding favorable currency translation impacts and favorable impact of acquisitions due to weaker end market demands and lower production volumes. The most significant declines occurred in Africa, China and Australia. Finally, consolidated replacement parts sales were approximately 488 million for the third quarter, up 4% on a reported basis and up approximately 5% year-over-year when excluding the effect of negative currency translation. Turning to Slide 9. The third quarter adjusted operating margin declined by 710 basis points versus a record third quarter of 2023. Margins in the quarter were heavily affected by the significant decline in production reflective of the increasingly weak industry conditions along with the higher discounts given the weak retail demand across the world. By region, the Europe Middle East segment income from operations decreased by $116 million and operating margins decreased by 620 basis points compared to the same period in 2023. The reduced margins were primarily a result of lower sales volume, factory under absorption from reduced production and increased discounts. North American income from operations decreased approximately $87 million year-over-year and operating margins were 7.2%. The decrease resulted from lower sales volume and increased factory under absorption, increased warranty expenses and higher SG&A expenses associated with the consolidation of the PTx Trimble business. Operating income in South America decreased by approximately $105 million. This decrease was primarily a result of continued weak market conditions, resulting in lower sales and significantly lower production volumes as well as increased discounts year-over-year. The operating margins in the quarter were 11.8%, driven by cost savings measures at the factories and in SG&A expenses as well as a onetime tax benefit in Argentina that flowed through cost of goods sold that contributed approximately 200 basis points of margin improvement. Lastly, income from operations in our Asia/Pacific/Africa segment decreased by approximately $12 million due to lower sales and production volumes. Slide 10 details our September year-to-date free cash flow for 2023 and 2024. As a reminder, free cash flow represents cash used in or provided by operating activities less purchases of property, plant and equipment, and free cash flow conversion is defined as free cash flow divided by adjusted net income. We used $387 million of cash through September of 2024, approximately $232 million more than the same period of 2023. Lower net income in 2024 is the primary driver of the year-over-year change. For the full year, we continue to expect our free cash flow to be in the upper half of our long-term targeted range of 75% to 100% of adjusted net income, putting us between $435 million to $580 million. We remain committed to a balanced capital allocation plan, which includes reinvesting back in the business, repaying debt to maintain our investment-grade credit ratings, and rewarding investors with direct returns. On November 1, we repaid the $500 million outstanding under the term loan facility, utilizing the proceeds from the Grain & Protein business. In addition to the regular quarterly dividend of $0.29 per share, as a reminder, we also paid a special variable dividend of $2.50 per share in the second quarter. AGCO has paid over $1.2 billion in special variable dividends over the last four years. We remain focused on deploying capital in the most effective ways for our long-term shareholders. Slide 11 highlights our 2024 market forecast for our 3 major regions, which has not changed from the last quarter. For North America, we still expect demand to be 10% to 15% lower compared to the levels in 2023. For Western Europe, we continue to expect the industry to be down 5% to 10% compared to 2023. Farmer sentiment and other indices have been hovering at historic lows for a few months now due to reduced commodity prices and higher input costs. Our forecast for South America remains unchanged, indicating a 25% to 30% industry decline in 2024. Slide 12 captures the assumptions related to our 2024 outlook, which now reflects the divestiture of the Grain & Protein business as of November 1. Despite the weakening market conditions, our sales plan includes market share gains. We are updating our full year pricing to reflect about a negative 1.5% year-on-year. This pricing assumption is comprised of positive pricing in North America, offset by negative pricing in South America and modestly negative pricing in Europe. Our raw material costs have stabilized and declined in certain cases. We are continuing to pursue cost savings and look to be about breakeven on a net pricing basis. We expect currency translation to have no meaningful effect on our sales year-over-year, where our prior guidance had assumed about a negative 1% adverse effect on sales year-over-year. Engineering expenses are now expected to be down 5% in 2024 compared to 2023, including PTx Trimble and 11% excluding PTx Trimble. We are reaffirming our adjusted operating margin target of approximately 9%, which we view as achievable, given the sales outlook and cost savings initiatives we have executed coupled with the structural changes we've made to our business. We see 2024 as being around 90% of mid-cycle, almost 15% below 2023, where AGCO saw a record adjusted operating margin of 12%. Despite the challenges in the third quarter, we are confident the AGCO team can deliver the 9% on a full year basis. This would represent among the highest adjusted operating margins ever achieved not only well above the prior trough of 4.1% adjusted operating margins we saw in 2016 but also higher than previous peak margins before we began executing our current strategy. We will provide updated long-term mid-cycle operating margin targets at our December 19 Analyst Meeting to account for the performance of PTx Trimble and the divestiture of our Grain & Protein business. Our effective tax rate is anticipated to be approximately 30% for 2024, in line with our prior guidance. Turning to Slide 13 for our revised 2024 outlook. Our full year net sales outlook is now $12 billion, down from our previous outlook, reflective of the market environment and the elimination of the Grain & Protein sales for the balance of the year. We are reducing our adjusted earnings per share forecast of $7.50, down from our prior guidance of $8, which is also reflective of the market environment and the elimination of the Grain & Protein sales for the balance of the year. Given the weak market environment, we are modestly reducing our CapEx spending to approximately $450 million. Our free cash flow conversion should be at the upper end of our targeted 75% to 100% of adjusted net income, consistent with our long-term target. On Slide 14, you can see the details for our 2024 analyst event, where we will provide sell-side analysts and investors an update on our business. We hope you will join us and we look forward to seeing you there. With that, I'll turn it back over to the operator for Q&A.
Operator: [Operator Instructions] And our first question today comes from Jamie Cook with Truist. Please go ahead.
Jamie Cook: Hi. Good morning. I guess two questions. First, on the guide for 2024, you're maintaining your margin guide. Pricing is an incremental headwind relative to the previous guide. Your sales forecast is lower and so sort of implies margins in the fourth quarter have to reach 10% versus 5.5% in the third quarter. So just trying to understand the margin ramp there and what would be driving that. And then my second question, just on AGCO dealer inventories. I mean, it sounds like you're saying the market is getting weaker, your dealer inventories are still bloated yet but you haven't changed your retail sales forecast. So I'm just trying to understand what's AGCO-specific versus the industry? And like to what degree is there any way you could frame the production cuts in South America and North America in the first half of 2025? Thank you.
Damon Audia: Sure. So Jamie, I'll go to your first question on the 10% outlook for the fourth quarter. Again, if I think about how I would look at the third quarter where you alluded to the 5.5%, I think there's a couple key differences here as we go into the fourth quarter. One is the production levels in Europe will be higher in the fourth quarter than they were in the third quarter, in fact, that they should be up at around 40% from Q4 versus Q3. We made the decision in the third quarter to really elongate some of the seasonal shutdown there, given the inventory, and we're still seeing fairly good demand in many parts of Europe. So we will see a little bit higher production in the fourth quarter in Europe specifically. Third quarter, we did do something strategically related to a large European dealer who was dealing with some financial challenges that was a little bit uncertain in the third quarter. For the most part, they have worked through that. We have much better clarity, and we expect to see a little bit of incremental volume related to that flowing from what would have been in Q3 flowing into Q4. So those would be a couple of things. In addition to that, you know that Q4 is always our seasonally strongest quarter that we'll see some improvements there. And then internally specific to AGCO, the cost actions that we've been implementing, we continue to see those pick up as we move month-to-month, and we start to take out more of the associates. And our warranty, again, we had a little bit of a spike here in the third quarter. We expect that to get more into the normalized rates here as we go into the fourth quarter. So at the end of the day, we feel good. We know the teams are working to drive the retail sellout, even in the weakening environment. I would make your comment on pricing. Probably the effective offset to that is FX is a little bit more of a tailwind for us here relative to where we were at the end of the third quarter, and those two sort of wash themselves out a little bit. But overall, we feel good. On the dealer inventory levels, as Eric alluded to in his comments, we are taking significant reductions in our production, working to reduce the dealer inventory units on hand. As you know, our inventory month is a forward 12-month forward-looking. And so as we do see the market continuing to be weak into 2025, that's reducing the retail sale outlook here for us, thus increasing the months of supply on hand. We are taking significant incremental production cuts around the world year-over-year. South America, again, will be the biggest one after back-to-back 50-plus percent cuts in Q2 and in Q3. We see South America down again, and that's lapping a very strong production cut last year in the fourth quarter, just given the very weak industry environment that we're seeing there, but we're also cutting production overall in Europe and in North America. So we sort of see that happening in the fourth quarter. We're not ready to give an outlook on what the production schedules will look like for early 2025 for South America or North America yet. We want to get through the fourth quarter, see how the retail traffic is, see how our share plays out, get our overall industry outlook in alignment. But as we sit here today, again, our confidence is that we will likely have to under produce, at least in the early part of 2025, just given what we see the industry and the current dealer inventories looking like right now.
Operator: Our next question today comes from Kristen Owen with Oppenheimer. Please go ahead.
Kristen Owen: Hi. Good morning. Thank you for the question. A little bit of a follow-up on that. Just help us understand. I mean, you talked about some of the moving pieces in Europe around the production, around some dealer things. Can you help us understand what pricing looks like in Europe and how to square that circle with some of the market share gains that you've seen? And then I'll have a follow-up.
Damon Audia: Yes. So Kristen, overall pricing in the quarter for Europe was modestly negative. I would tell you it's a little bit on the volume brands but even a little bit more in Fendt. If I break that down a little bit further, it's really focused on the transition that we're going through with the Fendt 700 Gen 6 and the Gen 7. You've heard us talk about introducing the new Gen 7 earlier this year. We are still producing the Gen 6. We'll transition through that in 2025 at some point in time. But as you would expect, as we still are offering dealers and farmers the opportunity to choose between a Gen 7 700 and the Gen 6, that Gen 6 is coming at a lower price point. And year-over-year, that's factoring into negative price in Europe. Again, I think when you look at our overall pricing being down at around 50 basis points year-over-year, I think it's important to understand the geographic mix. We're still seeing very good pricing here in North America. That has continued for the year and we expect that to continue. South America, we've been forecasting negative price now for a year. That's continuing to materialize. I would tell it's sort of in the low single digits this year as that market has continued to be weak. And then Europe is a little bit negative, as I said on my comments. And again, a lot of that has to do with this larger volume product in the Fendt 700 Gen 6 translating into the negative year-over-year price there in Europe.
Kristen Owen: Okay, that's really helpful. Thank you for that Damon. And then just generally speaking, on the lowered outlook for the full year, if I back out Grain & Protein fourth quarter of last year, that represents, let's call it, half the $500 million delta in the top line. Can you help us understand what that does for the bottom line? How much of a benefit is that to your year-over-year margin in the fourth quarter? Just a little bit more on the moving pieces of Grain & Protein in the revised guidance.
Damon Audia: Yes. So I think your -- on the revenue outlook, Kristen, you're right. I would tell you what we saw in the third quarter, the miss in Grain & Protein and where we sit here in the fourth quarter, that's about $200 million. About $150 million of that, I would say, directionally would be in the fourth quarter specifically. So that's the revenue. Operating margin-wise right now, as we sit here at this 9% with the sale happening November 1, I tell you it really has a de minimis effect on the operating margin. EPS-wise, it's about $0.10 of our guide down in the EPS is related to the elimination of the Grain & Protein business here for the balance of the year.
Operator: And our next question today comes from Stephen Volkmann with Jefferies. Please go ahead.
Stephen Volkmann: Good morning, guys. So can we just start off with Trimble, Eric? And you mentioned that things were sort of weaker, I guess, as the channels sort of change there. Was a little weaker than I expected. What's your outlook there? I mean, could Trimble be up next year sort of irrespective of end markets as that channel shift sort of changes?
Eric Hansotia: Yes, so it's an interesting situation in that, the activities that we're monitoring, many of them are on track in that we're signed up over 200 new dealers. We've converted our -- transformed how we're sourcing product or sourcing receivers on our own machines. We used to have two suppliers, majority of which was another supplier, not Trimble. We've converted that over to predominantly Trimble now. So those types of things are happening and on track, maybe even a little bit ahead of schedule. This big air pocket that we've talked about of the last-time buy from one of the top customer from Trimble is still feeding the market. So our -- even though we signed up all those dealers, they're really not ordering that much yet. We expect that to work its way through by the end of this year, and that's still on track with what we said last time. And then we can start seeing the activity come through from these dealers that we've signed up. Will next year be higher than this year? We're still working through our expectations for next year. The things we're putting in place, we feel good about. It depends on what the market does. The broad Ag indices are at their low points. You look at Purdue was at its low point and now bounced back today, came up a little bit. Well, that's just one data point. Will that be a trend? Don't know yet. The SIMA index in Europe is at its all-time low point. So we're certainly close to sentiment being at the very bottom. Now that's not meaning the markets at its very bottom but that's usually a good indicator of what the next few months look like. So we're trying to sort out where is that inflection point and what will happen with '25, we're not speaking to that big specifics yet. But what we're trying to focus on is what's in our control, driving those things in the channel and with the product to make sure that we're ready when the market is there.
Damon Audia: And Steve, the one comment I would add and you probably are familiar, CNH, the OE business, we know that, that is coming down this year. We've talked about them moving away from the Trimble business. That's transitioning out in 2024, that's continuing. So that will be a year-over-year headwind. If you remember at the time of the acquisition, we announced that we would be moving, as Eric alluded to, moving Trimble as our base offering in our OE production that will help mitigate some of that. But when I give you the reported sales, remember, the CNH sales today is reported in that number. But if I'm transitioning that into an AGCO product, it may not -- it won't report as an external sale of the company. And so similar to Precision Planting, where you'll hear us give one number, we'll try to overlay sort of what's intercompany for this technology. Again, we see part of that being mitigated. But just in absolute terms, that will be a headwind on reported numbers year-over-year.
Stephen Volkmann: Got it. That's helpful. Thanks. And then as a follow-up, you've been having sort of a semi-public debate with your largest shareholder and some changes in that relationship, I think, relative to production and so forth. Is that taking a significant amount of your time? And any sort of update you can give from your perspective?
Eric Hansotia: Yes. Just as a reminder, this is 1% of our sales and it's really only for a few markets. So the rest of the organization is focused on the core of our business and is marching forward trying to serve farmers and deliver on our Farmer-First strategy. There's a few of us that are trying to manage this in a professional way, and I think it's been handled that way well. We're looking for a smooth settlement to this overall situation. We put on the table some, we think, very generous offers to get it to resolve smoothly. The ball is really in TAFE's court now. But no, it's a small impact on the business. We're trying to keep it focused that way. And the organization is really focused on delivering Precision Ag solutions to production farmers all around the world. And we're going to have -- and we've got plenty of activity underway to replace that -- those tractor sales as well so we feel fine about that. The channel is served today. We've got inventory in the channel for those products. So dealers are served today. We've got backfill options that we're working and we have confidence in those. We've got open lines of communications with TAFE, offered a few very reasonable deals and generous deals. We're just hoping that they'll take those and we can resolve this.
Operator: And our next question today comes from Joel Jackson with BMO Capital Markets. Please go ahead.
Joel Jackson: Hi, good morning. Thanks for taking my question. I wanted to follow up on Europe a bit more. You did address some of this already a few minutes ago on a prior question. But like in trying to look through into early '25, which you've given just a little bit of outlook on that, trying to figure out how transient that step down in margins are in Europe in Q3. Again, you gave some color. But should we expect kind of a ramp back over a couple of quarters on margin in Europe? Or should we expect first half margins in Europe '25 to be a lot less than we saw in first half of '24 because it doesn't mean a lot for you guys? Thanks.
Damon Audia: Joel, I think it's a little bit too early for us to -- we're not going to get into the outlook for 2025 yet. But I think if you step back at the more macro level, Europe from an industry standpoint tends to be the least volatile of all of the three major regions that we sell in. That continues to lend itself to better stability in our order patterns. You don't see as much variability like you do in North America, South America. We know year-over-year, where we've seen the SIMA index, which is Eric alluded to the Purdue barometer here, the SIMA index is at a historic low point right now. When you look at that index, it usually doesn't stay at that point for a long time. It usually hits there and then starts to recover. We're not ready to call industry bottom yet. But again, when we look at some of the indicators in the marketplace, we feel like we're hitting near the bottom from a sentiment standpoint. Our big challenge next year as we think about 2025 is going to be the overall industry. How does that play out, pricing and then what do we do to make sure that we're adjusting the dealer inventories to get back to that four months? Again, we said we were up about half a month here from the third -- from the second quarter to the third quarter, again, fairly manageable for us to work that down, especially with the fourth quarter being a strong sales month for us with farmer sentiment as a big point, and that will influence the other things. And as I mentioned on one of the prior questions, we do have a couple of products that we're transitioning out here with the Fendt 700 Gen 6. That will move down, which will hopefully, year-over-year, improve the pricing. But again, the market will really dictate sort of how 2025 shapes out in Europe for us.
Greg Peterson: But Joel, we do expect our fourth quarter margins in Europe to bounce back similar to what they look like in the first half of the year.
Joel Jackson: That's helpful. Thank you. And just another question. Trying to compare Slides 4 -- excuse me, Slide 11 from today's deck. So Slide 11, you've maintained it what it was a few months ago. You maintained all of your market outlook for tractors across the three regions that you show to maintain that. But on Slide 4, especially for tractors, the nine-month performance year-to-date contraction for tractors in North America and in Europe are worse versus six-month performance. South America, I think, is a bit better. But can you explain that a bit, reconcile that a bit how you've been able to keep the full year outlook the same but there's contractions on worse, and then you thought -- well, the contraction trends are worse through nine months versus six? Thanks.
Greg Peterson: So Joel, we're -- essentially, we've moved to kind of the top end of the range in terms of the markets going down year-over-year. There's a little bit of a disconnect in South America. And that our outlook is on wholesale as opposed to retail because that's where we have more visibility on and in terms of industry being reported. So South America looks a little bit different just because we're looking at wholesale versus retail.
Operator: And our next question today comes from Mig Dobre with RW Baird. Please go ahead.
Mig Dobre: Yes. Good morning everyone. So I'm trying to sort of put the pieces together here on dealer inventories and demand. I mean, if I heard you correctly, dealer inventories declined 6% sequentially in terms of units in Q3. But then you're also talking about having, on average, about an extra month of dealer inventory based on how you're thinking about forward demand. Given the fact that you haven't really changed your outlook for demand for 2024, are we sort of to infer here that what's baked in here is maybe like kind of a mid-teens decline in 2025? Is my math correct? And if so, can you give us some color by geography in terms of where you're experiencing more weakness, how we should be thinking roughly about '25?
Damon Audia: Yes. So Mig, again, we're not going to give an outlook for 2025 just yet. We want to get through the fourth quarter, see how the retail demand plays out, work through our analytics for the full year here. But I think what we are alluding to, and Eric has said this in a couple of prior calls, when you look at our historical industry changes, we usually go through one very large transitional year, and that's what we're going through this year. We're moving down directionally around 15% from where we were last year to where we are this year. And then historically, the industry floats in that general vicinity. As we look at where we're sitting here today, we are expecting the market to be down next year. Again, we're not expecting large declines. Again, the industry historically doesn't do that, but we are expecting to see some weakness again next year, probably in most parts of the world. If I look at where the biggest challenges have been, South America continues to be the one that we're seeing the most industry challenge right now. And I think there's a couple of pieces here. You see us cutting the production again for four quarters now from Q4 last year through the third quarter of this year. We've been cutting production anywhere from 30% to 50%. We're planning another large production cut here in the fourth quarter of this year, really trying to take the production down. I think it's important that when you see these numbers even in South America, it's a little bit of the two parts to the story there. When you look at the numbers being down in South America, the high-horsepower segment of the market in the third quarter was down significantly more than the overall industry. And that there is a negative mix happening right now and at the very low horsepower, say, the 79-horsepower and below was actually up in the third quarter. And so when you're looking at that mix, you're seeing the overall units don't look as bad. But for where AGCO is really focused when we're making the profit, that part of the market was down significantly in the quarter and mitigated by some of these lower-horsepower segments that were actually up. So South America definitely continues to be a big challenge for us because we know this is the biggest, most volatile market we deal with. It always has been and likely always will be. North America, I would then say, a second. We're seeing the large Ag segment of the market really be challenged right now. And so we're cutting the production there. And we're seeing sort of the dealer inventory levels continue to creep up, not based on units. Units are down but we're seeing it just based on the forward look. So again, we would expect probably in the early part of the year, again, more challenges for our production and to deal with some of that North American market share as well our North American dealer inventory as well. And then Europe, I would say, on the back end of that, is going to be more product-specific or country-specific issues.
Mig Dobre: Understood. Maybe just to follow up on that...
Eric Hansotia: I'll just build on a little bit, Mig, and then take your follow-up. To put some numbers behind this, our last cycle in terms of AGCO's sales mix around the world, we had -- we went from a peak of 115 down to a trough of 85. At the peak, we were not supply constrained nor was the industry. This time, our peak only got up to 109 because everybody was supply constrained during COVID. So we believe then that the trough won't be as deep potentially nor as long potentially as the last trough was. As I said, the last trough was 80 to 85. In 2024, we've gone from about 105 to about 90. It's the big correction year that Damon talked about. So you compare that 90 to the previous trough that we think is probably as deep as it would get, which was 85. That kind of sizes what we're trying to assess of what '25 looks like. We expect that to float near somewhere between 2024's results and the previous trough. And we'll clarify that in more detail in December, but at least that gives you some bookends to frame it.
Mig Dobre: Helpful. Thank you for that. My follow-up is on your production slide, Slide 5, and the guidance there. I mean, considering the fact that you're dealing with excess inventory still, I'm wondering when we're not seeing more pressure on production in the fourth quarter. I mean, you're cutting production 25%, I understand that, year-over-year. But it certainly looks stable, if not up a little bit sequentially. And I'm wondering why we're not seeing more of this action being taken in the fourth quarter rather than 2025? Thank you.
Damon Audia: Yes. So Mig, what I'd tell you, we are being extremely aggressive in many different parts of the market and many of the different product types again. When you look at our production hours, that includes more than just tractors, it would include combines, sprayers, planters. So we are significantly reducing production in many aspects. I think what you're seeing in that visual there is mainly Europe. As I mentioned, Europe, we extended the shutdowns in the third quarter to really sort of be better optimizing the cost structure. And then we're picking up a little bit here in the fourth quarter. And again, when you think about what we're seeing is there is still retail demand out there. And if you look at the dealer inventories, what's on the dealers' lots may not always be exactly what the farmers are looking at coming to order. And again, go back to my comment on South America, where the high-horsepower Ag market is really challenged right now. That's sitting on the dealers' lots. What these lower-horsepower segments are doing actually pretty well in South America. So we have orders and demand for those products. We're running the production to service that need. And again, similar in North America or in Europe, there may be product lines or retail demand that we're working to produce. We're not producing to put more onto the dealer lot. But we think about what we're producing is really more of a pass-through to the end farmer where we see the demand. So again, I realize that the numbers look different, but when you factor in what's happening in Europe sequentially or year-over-year versus what's happening in other parts like South America, we are rapidly reducing the production hours in most of our factories.
Operator: Our next question today comes from Tami Zakaria with J.P. Morgan. Please go ahead.
Tami Zakaria: Good morning. Thank you so much. So I think I heard you say you expect North America pricing to continue to be strong. Can you help us understand, do you expect any incremental discounting needed to clear the channel? And what's really driving this expectation of pricing growth in North America? Is it mix or are you raising prices due to cost inflation? Anything to call out there? What underpins this expectation of positive pricing in North America against suboptimal demand backdrop?
Damon Audia: Yes. Tami, we've had positive pricing in North America for the full year or year-to-date, I should say. I'd say it's really a couple of variables here. One is the year-over-year price increases with certain new products that we're getting. And I would say, as we think about the back half of this year, what we're seeing this quarter, fourth quarter is really being a lot more selective on discounting, especially in some of the lower horsepower segments of the market, the rural lifestyle. As you know, a lot of these tractors are financed. And so as interest rates are coming down, we're trying to take advantage of that where we can drive better discounting decisions, thus reducing the overall cost to AGCO. And that's helping improve sort of the sequential pricing in North America significantly as we move from Q2 into Q3 and now into Q4 and into 2025. But those are really the couple of big variables that are driving the pricing in North America.
Tami Zakaria: Got it, that's helpful. And my second question is, can you remind what's your plan in terms of deleveraging the balance sheet? And should we expect more debt pay down in the coming quarters? I think you paid down $150 million with the proceeds. But any more plans of debt pay down in the next few quarters?
Damon Audia: Yes. So we did pay down the -- we had a $500 million term loan in place as part of the funding for the Trimble joint venture. So that has been repaid with some of the proceeds from the Grain & Protein business. We have about $0.25 billion of debt that will mature, I think, in March, April time frame. Tami, I think as we sit here today, we would likely just pay that down with the balance of the Trimble proceeds, coupled with some free cash flow. Those will be the two big things. And then we'll look to see if there's anything else that may make sense. But that will happen, I think March, April time frame.
Operator: And our next question today comes from Jerry Revich with Goldman Sachs. Please go ahead.
Unidentified Analyst: This is Clay on for Jerry. Can you update us on your expectations for the planter business as we move into next year, given some of the early order conversations you're having?
Damon Audia: Yes. I think overall, early order program is, given the market environment that we're seeing here in North America, I think the early order program has gone relatively well for planters and for sprayers. I think we're not as strong as we were last year this time, but we're out through the first half of 2024 with orders for planters and sprayers. So if you remember, Clay, our early order program sort of rolls from start of Q4, Q3 to Q3. So almost the full year booked right now but not quite on those particular products. But overall, pretty good.
Unidentified Analyst: Thanks. And as a quick follow-up, on dealer inventories, can you compare levels now on an absolute basis in North America versus pre COVID? And I'll be curious to hear about other regions as well.
Damon Audia: Yes. Well, if we look at the pre-COVID levels, I think as before the massive decline, ideally, they would have been around in that five to six-month range for North America. We're sitting here obviously higher than that, but that's what we keep talking about reducing the production cuts as to get that dealer inventory right around that six-month mark here as soon as possible in early 2025.
Operator: And our final question today will come from Chad Dillard with Bernstein. Please go ahead. It looks like Chad's line has disconnected. This will conclude our question-and-answer session. I would like to turn the conference back over to Eric Hansotia for any closing remarks.
Eric Hansotia: I'll close today by saying that in the short term, we are focused on reducing inventory and aggressively controlling costs to better align our operations with the current weak market environment. Our 9% operating profit is far above the previous trough, which was closer to 4% and even above the last peak margin that was close to 8%. But we're striving to do even better. Our org efficiency and restructuring activities that we've already implemented so far this year will deliver $100 million to $125 million of savings right on target that we projected when we took those actions. And despite all the current challenges, we remain focused on continued execution of our Farmer-First strategy. The strategic actions we've taken over the last nine months, big ones like forming the PTx Trimble joint venture, divesting our Grain & Protein business, and implementing our organizational efforts to take control -- take advantage of tools like automation and AI will enhance and accelerate the benefits of our Farmer-First strategy. Over the last few quarters, we've touched on many factors supporting our markets, including growing populations, changing diets, low stock-to-use levels, increased demand for biofuels and relatively healthy commodity prices. All these trends give us confidence in the long-term health of our industry. And while cycles are typical in the industry, how we react and weather to them, will illustrate how we are structurally changing AGCO to be higher performing regardless of market conditions. We look forward to seeing you at our upcoming analyst meeting on December 19. Thank you, and have a good day.
Operator: Thank you for joining the AGCO Third Quarter 2024 Earnings Call. The call has now concluded. Have a nice day.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.